Tank macht keinen Neustart

Antworten
Benutzeravatar
Bualicher
NI - VIP
Beiträge: 230
Registriert: Di 12. Apr 2016, 12:22

Tank macht keinen Neustart

Beitrag #1 von Bualicher » Fr 19. Aug 2022, 11:55

Hallo zusammen,

kann einer von Euch folgendes Problem nachstellen?

Wenn ich über Menü --> Neustart versuche meine Tank neuzustarten, dann kommt EPG speichern und die Box fährt runter. Dabei bleibt sie aber auch. Es brennt keine LED mehr und die Kiste ist auch weg vom Netzwerk. Sie reagiert auf keine Fernbedienung oder Tasten am Frontpanel. Der einzige Weg die Box wieder hochzufahren ist der Netzschalter aus und ein.
Dachte es wäre ein Bug einer Nightly und habe daher vom Nightly 15.07.2022 auf Aktuell (war am Dienstag, also 16.08.2022) upgedated.
Ein Neustart war weiterhin nicht möglich.

Kann von Euch jemand das Problem nachstellen oder liegt es an mir?
'
Vielen Dank für Eure Antworten

Bualicher

Benutzeravatar
Miky
NI - Team
Beiträge: 1140
Registriert: Di 5. Apr 2016, 17:17
Box: Tank, Trinity, Neo 1, Neo2, Neo²

Re: Tank macht keinen Neustart

Beitrag #2 von Miky » Fr 19. Aug 2022, 12:42

Ich habe das Problem auch. Komischerweise war meine Tank zur Reparatur bei einem Teamkollegen und dort zeigte sie das Problem nicht.
Vanhofen hat versucht dort was zu fixen, anscheinend hat das aber nicht gereicht.
Kannst Du das mitloggen?
Boxen: Neo 1, Neo2 , Neo², Trinity, Tank, alle SAT
Kein PN Support!

Benutzeravatar
annie
NI - Team
Beiträge: 944
Registriert: Di 5. Apr 2016, 18:46
Wohnort: zuhause
Box: 1x E4HD, 4x HD51,1x VuUno4K

Re: Tank macht keinen Neustart

Beitrag #3 von annie » Fr 19. Aug 2022, 13:59

Ein Log wäre hilfreich, da wird irgendwas nicht beendet, die Box ist noch garnicht runter gefahren.

Schalte testweise mal EPG speichern auf aus, oft ist das die Ursache, weil USB Stick oder Festplatte hängen beim Speichern....

Benutzeravatar
Bualicher
NI - VIP
Beiträge: 230
Registriert: Di 12. Apr 2016, 12:22

Re: Tank macht keinen Neustart

Beitrag #4 von Bualicher » Fr 19. Aug 2022, 14:53

Hallo zusammen,

hier das serielle Log vom versuchten Neustart.
Beginnt mit der Taste zum Neustart und hört mit dem finalen eingefrorenen Stand auf:

Code: Alles auswählen

key: 0006 value 1, translate: 0006 -5-
StopAutoRecord: autoshift 0
[neutrino] ExitRun(int 2)
[neutrino] hw_caps->can_shutdown: 1
[neutrino] [CLCD4l] [StopLCD4l - 186] stopping thread [0x26e5da0]
[neutrino] [CLCD4l] [StopLCD4l - 190] thread [0x26e5da0] joined
[neutrino] [CLCD4l] [StopLCD4l - 194] thread [(nil)] terminated
Aug 19 14:42:25 Tank user.info service[2950]: running /etc/init.d/lcd4linux stop
stopPlayBack: stopping...
stopPlayBack: stopped
[zapit.cpp:StopPlayBack:2450] standby 0 playing 1 forced 0 send_pmt 0
CSAPI (AUDIO): PCM: Stopping Decoded PCM(DSP) stream
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): setBlank: 1
TuxTxt stopping subtitle thread ...
[dvb-sub] paused
CSAPI (VIDEO): ShowPicture: /usr/share/tuxbox/neutrino/icons/shutdown.jpg
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Video Picture Information
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Decode Dimensions:   (1280 x 720)
CSAPI (VIDEO): Display Extension Info Present:   No
CSAPI (VIDEO): Aspect Ratio: OTHER (0) Frame Rate:   0 (0)
CSAPI (VIDEO): Color Space:  0 Interlaced:   No
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): setBlank: 0
[scanepg.cpp:Stop:236] stopping live scan...
2022-08-19 14:42:28.444 [sectionsd] Request of stop scanning (now scanning).
CVFD::ShowText: [0x1d][Speichere EPG]
[neutrino] Saving EPG to /media/Flash_Disk-1/epg...
key: 0006 value 0, translate: 0006 -5-
[sectionsd] Try to open file: /media/Flash_Disk-1/epg/index.tmp
2022-08-19 14:42:28.696 [sectionsd] Writing Information to file: /media/Flash_Disk-1/epg/index.tmp
2022-08-19 14:42:39.763 [sectionsd] Writing Information finished
CVFD::setlcdparameter dimm 2 power 1
stopPlayBack: stopping...
stopPlayBack: stopped
[dvb-sub] paused
[dvb-sub] stopped
streaming shutdown
streaming shutdown done
timerd shutdown
[timerd] stopping timermanager thread ...
[timerd] Waiting for timermanager thread to terminate ...
[timerd] Timermanager thread terminated
[timerd] shutdown: timer type 5 state 0 announceTime: 1660922700
[timerd] shutdown: nextAnnounceTime 1660922700
[timerd] shutdown: timer type 5 state 0 announceTime: 1661093520
[timerd] shutdown: timer type 5 state 0 announceTime: 1661105460
[timerd] shutdown: timer type 5 state 0 announceTime: 1661098140
[timerd] shutdown: timer type 5 state 0 announceTime: 1661012760
[timerd] shutdown: timer type 5 state 0 announceTime: 1661796660
[timerd] shutdown: timeset: 1 timer_minutes 27682042
timerd shutdown complete
timerd shutdown done
sectionsd shutdown
2022-08-19 14:42:39.924 [sectionsd] stopping...
2022-08-19 14:42:39.924 [sectionsd] eitThread::StopRun: to lock
2022-08-19 14:42:39.931 [sectionsd] eitThread::StopRun: to closefd
2022-08-19 14:42:39.937 [sectionsd] eitThread::StopRun: to unlock
2022-08-19 14:42:39.943 [sectionsd] cnThread::StopRun: to lock
2022-08-19 14:42:39.949 [sectionsd] cnThread::StopRun: to closefd
2022-08-19 14:42:39.956 [sectionsd] cnThread::StopRun: to unlock
2022-08-19 14:42:39.962 [sectionsd] timeThread::StopRun: to lock
2022-08-19 14:42:39.968 [sectionsd] timeThread::StopRun: to closefd
2022-08-19 14:42:39.973 [sectionsd] timeThread::StopRun: to unlock
2022-08-19 14:42:39.980 [sectionsd] freeSatThread::StopRun: to lock
2022-08-19 14:42:39.986 [sectionsd] freeSatThread::StopRun: to closefd
2022-08-19 14:42:39.992 [sectionsd] freeSatThread::StopRun: to unlock
2022-08-19 14:42:39.998 [sectionsd] broadcasting...
2022-08-19 14:42:40.005 [sectionsd] pausing...
2022-08-19 14:42:40.010 [sectionsd] join Housekeeping
2022-08-19 14:42:40.015 [sectionsd] join TOT
2022-08-19 14:42:40.019 [sectionsd] timeThread::Stop: to broadcast
2022-08-19 14:42:40.025 [sectionsd] timeThread stopped
2022-08-19 14:42:40.028 [sectionsd] timeThread::Stop: to join
2022-08-19 14:42:40.035 [sectionsd] timeThread::Stop: to close
2022-08-19 14:42:40.041 [sectionsd] join EIT
2022-08-19 14:42:40.047 [sectionsd] eitThread::Stop: to broadcast
2022-08-19 14:42:40.051 [sectionsd] eitThread stopped
2022-08-19 14:42:40.058 [sectionsd] eitThread::Stop: to join
2022-08-19 14:42:40.062 [sectionsd] eitThread::Stop: to close
2022-08-19 14:42:40.068 [sectionsd] join CN
2022-08-19 14:42:40.073 [sectionsd] cnThread::Stop: to broadcast
2022-08-19 14:42:40.078 [sectionsd] cnThread: stop eit update filter (active)
2022-08-19 14:42:40.081 [sectionsd] cnThread::Stop: to join
2022-08-19 14:42:40.104 [sectionsd] cnThread stopped
2022-08-19 14:42:40.105 [sectionsd] cnThread::Stop: to close
2022-08-19 14:42:40.112 [sectionsd] join FSEIT
2022-08-19 14:42:40.117 [sectionsd] freeSatThread::Stop: to broadcast
2022-08-19 14:42:40.121 [sectionsd] freeSatThread stopped
2022-08-19 14:42:40.128 [sectionsd] freeSatThread::Stop: to join
2022-08-19 14:42:40.133 [sectionsd] freeSatThread::Stop: to close
2022-08-19 14:42:40.139 [sectionsd] stopped
sectionsd shutdown done
TuxTxt stopping subtitle thread ...
zapit shutdown
stopPlayBack: stopping...
stopPlayBack: stopped
CSAPI (PVR-PLAY): cPlayback::Close
[zapit] saving channel, apid 13ee sub pid 0 mode 0 volume 50
[zapit.cpp:StopPlayBack:2450] standby 0 playing 0 forced 0 send_pmt 1
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 STOP src 0 mask 1 -> 0 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:385]  (newmask == 0)
[capmt.cpp:SetMode:442] CI: not used, disabling TS
[femanager.cpp:saveSettings:355] fe0
[femanager.cpp:saveSettings:355] fe1
[femanager.cpp:saveSettings:355] fe2
[femanager.cpp:saveSettings:355] fe3
[ConfigFile] saving /var/tuxbox/config/zapit/frontend.conf
[zapit.cpp:run:2887] shutdown started
CSAPI (AUDIO): PCM: Stopping RCA port
CSAPI (AUDIO): PCM: Stopping SPDIF port
CSAPI (AUDIO): PCM: Stopping HDMI port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from SPDIF port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from HDMI port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from RCA port
CSAPI (VIDEO): Stop: blank 1
[zapit.cpp:run:2924] demuxes/decoders deleted
[frontend.cpp:Close:362] [fe0/0] close frontend fd 27
[frontend.cpp:Close:362] [fe0/1] close frontend fd 28
[frontend.cpp:Close:362] [fe0/2] close frontend fd 29
[zapit.cpp:run:2934] frontend(s) deleted
[zapit.cpp:run:2936] stopping CA
CSAPI (CA): Exiting thread
CSAPI (DVB-CI): slot 0 was initialized, stopping
CSAPI (DVB-CI): slot 0 was initialized, wait for stop..
CSAPI (DVB-CI): 0: Driver requested to stop
CSAPI (DVB-CI): CNXT_DVBCI_ST_STOPPED State...
CSAPI (DVB-CI): 0: DVBCI - Task Terminating
[zapit.cpp:run:2940] shutdown complete
zapit shutdown done
CS_API: chip is APOLLO
cnxt_scd_close succeeded - Handle = 0x0.
entering off state
timer_minutes: 27682042
CS_API: chip is APOLLO
CSAPI (VIDEO): StopPicture
CSAPI (VIDEO): setBlank: 1
CSAPI (VIDEO): setAspectRatio: aspect -1 mode 2
CSAPI (VIDEO): VIDEO: Set aspect mode to none
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Standby 0 -> 1
CSAPI (HDMI-CEC): Power Status: ON -> STANDBY
CSAPI (HDMI-CEC): Broadcast Standby
CSAPI (VIDEO): setBlank: 1
CSAPI (HDMI-CEC): Power Status: STANDBY
[neutrino] This is the end. Exiting with code 2
called Close() but handle closed, exiting
Aug 19 14:42:41 Tank user.info start_neutrino[914]: Neutrino exited with exit code 2
Aug 19 14:42:41 Tank user.notice shutdown[3001]: shutting down for system reboot
INIT: Aug 19 14:43:02 Tank daemon.info init: Switching to runlevel: 6
Switching to runlevel: 6
INIT: Sending processes configured via /etc/inittab the TERM signal
Aug 19 14:43:02 Tank user.info rc[3046]: running /etc/rc6.d/K01camd stop
Aug 19 14:43:02 Tank user.info K01camd[3051]: stop camd_datefix
Aug 19 14:43:02 Tank user.info K01camd[3051]: stop doscam
Aug 19 14:43:03 Tank user.info rc[3046]: running /etc/rc6.d/K01user-initscripts stop
Aug 19 14:43:03 Tank user.info K01user-initscripts[3064]: run users initscripts stop ...
Aug 19 14:43:03 Tank user.info rc[3046]: running /etc/rc6.d/K20emmrd stop
Aug 19 14:43:03 Tank user.info rc[3046]: running /etc/rc6.d/K20fritzcallmonitor stop
Aug 19 14:43:03 Tank user.info rc[3046]: running /etc/rc6.d/K20openvpn stop
sh: you need to specify whom to kill
Aug 19 14:43:06 Tank user.info rc[3046]: running /etc/rc6.d/K20plugins-hide stop
Aug 19 14:43:06 Tank user.info rc[3046]: running /etc/rc6.d/K20tuxcald stop
Aug 19 14:43:06 Tank user.info rc[3046]: running /etc/rc6.d/K20tuxmaild stop
Aug 19 14:43:06 Tank user.info rc[3046]: running /etc/rc6.d/K25autofs stop
Aug 19 14:43:06 Tank user.info K25autofs[3139]: stopping
Aug 19 14:43:06 Tank user.info rc[3046]: running /etc/rc6.d/K25dropbear stop
Aug 19 14:43:06 Tank user.info rc[3046]: running /etc/rc6.d/K25inadyn stop
Aug 19 14:43:06 Tank user.info rc[3046]: running /etc/rc6.d/K25minidlnad stop
Aug 19 14:43:06 Tank user.info rc[3046]: running /etc/rc6.d/K25nfsd stop
Aug 19 14:43:06 Tank daemon.notice rpc.mountd[801]: Caught signal 15, un-registering and exiting.
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K25samba stop
stopping nmbd ...done
stopping smbd ...done
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K25ushare stop
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K25vsftpd stop
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K25xupnpd stop
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K50crond stop
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K50inetd stop
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K97sdX stop
Aug 19 14:43:07 Tank user.info K97sdX[3188]: stopping /dev/sda
Aug 19 14:43:07 Tank user.info K97sdX[3188]: stopping /dev/sdb
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K98fstab stop
Aug 19 14:43:07 Tank user.info K98fstab[3195]: unmount all netfs stuff from /etc/mtab
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K98network stop
Aug 19 14:43:07 Tank user.info K98network[3200]: Deconfiguring network ...
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K98rootx-mount stop
umount: can't unmount /mnt/root0: No such file or directory
Aug 19 14:43:07 Tank user.info rc[3046]: running /etc/rc6.d/K98syslogd stop
Aug 19 12:43:07 Tank syslog.info syslogd exiting
Aug 19 12:43:07 Tank user.info rcK[3227]: start
'
Vielen Dank für Eure Antworten

Bualicher

Benutzeravatar
Miky
NI - Team
Beiträge: 1140
Registriert: Di 5. Apr 2016, 17:17
Box: Tank, Trinity, Neo 1, Neo2, Neo²

Re: Tank macht keinen Neustart

Beitrag #5 von Miky » Fr 19. Aug 2022, 16:19

Was mir noch einfällt....hast du ein Modul drin? Wenn ja, mal vor dem Neustart entfernen. Das hilft bei mir.
Boxen: Neo 1, Neo2 , Neo², Trinity, Tank, alle SAT
Kein PN Support!

Benutzeravatar
Bualicher
NI - VIP
Beiträge: 230
Registriert: Di 12. Apr 2016, 12:22

Re: Tank macht keinen Neustart

Beitrag #6 von Bualicher » Fr 19. Aug 2022, 17:13

Miky hat geschrieben:
Fr 19. Aug 2022, 16:19
Was mir noch einfällt....hast du ein Modul drin? Wenn ja, mal vor dem Neustart entfernen. Das hilft bei mir.
Nein, kein Modul drin.
Es steckt nur der USB-Stick drin und eine HDD ist eingebaut.

Mal sehen ob jemand meinem Log etwas entnehmen kann.
'
Vielen Dank für Eure Antworten

Bualicher

Benutzeravatar
annie
NI - Team
Beiträge: 944
Registriert: Di 5. Apr 2016, 18:46
Wohnort: zuhause
Box: 1x E4HD, 4x HD51,1x VuUno4K

Re: Tank macht keinen Neustart

Beitrag #7 von annie » Fr 19. Aug 2022, 18:21

hast du ein ext. LCD dran und schaltest das vor dem Ausschalten aus ?

Benutzeravatar
Bualicher
NI - VIP
Beiträge: 230
Registriert: Di 12. Apr 2016, 12:22

Re: Tank macht keinen Neustart

Beitrag #8 von Bualicher » Fr 19. Aug 2022, 18:46

annie hat geschrieben:
Fr 19. Aug 2022, 18:21
hast du ein ext. LCD dran und schaltest das vor dem Ausschalten aus ?
Nein, kein ext. LCD dran. Am Verhalten hat LCD4Linux ein oder aus auch keinen Einfluss. Soeben versucht.
'
Vielen Dank für Eure Antworten

Bualicher

Benutzeravatar
Don de Deckelwech
NI - Team
Beiträge: 1405
Registriert: Di 12. Apr 2016, 17:13
Wohnort: Wuppertal
Box: Tank / HD51 für Kabel
Kontaktdaten:

Re: Tank macht keinen Neustart

Beitrag #9 von Don de Deckelwech » Fr 19. Aug 2022, 19:09

Hi,
schalte mal in Menu->Service->Daemon-Steuerung alles aus, was du garnicht benötigst/benutzt.

Ciao,
DdD.
"Ein Log, ist besser als kein Log!"

Benutzeravatar
Bualicher
NI - VIP
Beiträge: 230
Registriert: Di 12. Apr 2016, 12:22

Re: Tank macht keinen Neustart

Beitrag #10 von Bualicher » Fr 19. Aug 2022, 19:42

Don de Deckelwech hat geschrieben:
Fr 19. Aug 2022, 19:09
Hi,
schalte mal in Menu->Service->Daemon-Steuerung alles aus, was du garnicht benötigst/benutzt.

Ciao,
DdD.
Das wars oder hatte zumindest damit zu tun.
Ich habe jetzt den Samba abgeschaltet und die Box macht den Neustart ohne Probleme.
Seltsamerweise startet die Box jetzt auch, nachdem ich den Samba wieder eingeschaltet habe.
Davor konnte nichtmal ein Imageupdate die Kiste zum Neustart bewegen.
Ich habe keine Ahnung was es denn jetzt tatsächlich war, aber es funktioniert wieder :grin:

Danke Euch allen für die hilfreichen Tipps :thumbsup:
'
Vielen Dank für Eure Antworten

Bualicher

Benutzeravatar
Don de Deckelwech
NI - Team
Beiträge: 1405
Registriert: Di 12. Apr 2016, 17:13
Wohnort: Wuppertal
Box: Tank / HD51 für Kabel
Kontaktdaten:

Re: Tank macht keinen Neustart

Beitrag #11 von Don de Deckelwech » Fr 19. Aug 2022, 20:00

Hi,
Sachen gibts, die gibts garnicht! :D

Kannst du vllt trotzdem nochmal ein Log vom erfolgreichen Neustart machen, so wie oben das andere?

Ciao,
DdD.
"Ein Log, ist besser als kein Log!"

Benutzeravatar
Bualicher
NI - VIP
Beiträge: 230
Registriert: Di 12. Apr 2016, 12:22

Re: Tank macht keinen Neustart

Beitrag #12 von Bualicher » Sa 20. Aug 2022, 04:48

Hier noch das angefragte serielle Log vom durchgelaufenen Neustart.
Wie oben ab Taste Neustart bis Bild auf TV:

Code: Alles auswählen

key: 0006 value 1, translate: 0006 -5-
StopAutoRecord: autoshift 0
[neutrino] ExitRun(int 2)
[neutrino] hw_caps->can_shutdown: 1
Aug 20 04:19:49 Tank user.info service[9585]: running /etc/init.d/lcd4linux stop
stopPlayBack: stopping...
stopPlayBack: stopped
[zapit.cpp:StopPlayBack:2450] standby 0 playing 1 forced 0 send_pmt 0
CSAPI (AUDIO): PCM: Stopping Decoded PCM(DSP) stream
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): setBlank: 1
TuxTxt stopping subtitle thread ...
[dvb-sub] paused
CSAPI (VIDEO): ShowPicture: /usr/share/tuxbox/neutrino/icons/shutdown.jpg
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Video Picture Information
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Decode Dimensions:   (1280 x 720)
CSAPI (VIDEO): Display Extension Info Present:   No
CSAPI (VIDEO): Aspect Ratio: OTHER (0) Frame Rate:   0 (0)
CSAPI (VIDEO): Color Space:  0 Interlaced:   No
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): setBlank: 0
[scanepg.cpp:Stop:236] stopping live scan...
2022-08-20 04:19:49.821 [sectionsd] Request of stop scanning (now scanning).
CVFD::ShowText: [0x1d][Speichere EPG]
[neutrino] Saving EPG to /media/Flash_Disk-1/epg...
key: 0006 value 0, translate: 0006 -5-
[sectionsd] Try to open file: /media/Flash_Disk-1/epg/index.tmp
2022-08-20 04:19:50.103 [sectionsd] Writing Information to file: /media/Flash_Disk-1/epg/index.tmp
2022-08-20 04:20:00.341 [sectionsd] Writing Information finished
CVFD::setlcdparameter dimm 2 power 1
stopPlayBack: stopping...
stopPlayBack: stopped
[dvb-sub] paused
[dvb-sub] stopped
streaming shutdown
streaming shutdown done
timerd shutdown
[timerd] stopping timermanager thread ...
[timerd] Waiting for timermanager thread to terminate ...
[timerd] Timermanager thread terminated
[timerd] shutdown: timer type 5 state 0 announceTime: 1661181900
[timerd] shutdown: nextAnnounceTime 1661181900
[timerd] shutdown: timer type 5 state 0 announceTime: 1661093520
[timerd] shutdown: nextAnnounceTime 1661093520
[timerd] shutdown: timer type 5 state 0 announceTime: 1661105460
[timerd] shutdown: timer type 5 state 0 announceTime: 1661098140
[timerd] shutdown: timer type 5 state 0 announceTime: 1661012760
[timerd] shutdown: nextAnnounceTime 1661012760
[timerd] shutdown: timer type 5 state 0 announceTime: 1661796660
[timerd] shutdown: timeset: 1 timer_minutes 27683543
timerd shutdown complete
timerd shutdown done
sectionsd shutdown
2022-08-20 04:20:00.616 [sectionsd] stopping...
2022-08-20 04:20:00.617 [sectionsd] eitThread::StopRun: to lock
2022-08-20 04:20:00.623 [sectionsd] eitThread::StopRun: to closefd
2022-08-20 04:20:00.629 [sectionsd] eitThread::StopRun: to unlock
2022-08-20 04:20:00.635 [sectionsd] cnThread::StopRun: to lock
2022-08-20 04:20:00.642 [sectionsd] cnThread::StopRun: to closefd
2022-08-20 04:20:00.652 [sectionsd] cnThread::StopRun: to unlock
2022-08-20 04:20:00.655 [sectionsd] timeThread::StopRun: to lock
2022-08-20 04:20:00.661 [sectionsd] timeThread::StopRun: to closefd
2022-08-20 04:20:00.666 [sectionsd] timeThread::StopRun: to unlock
2022-08-20 04:20:00.672 [sectionsd] freeSatThread::StopRun: to lock
2022-08-20 04:20:00.680 [sectionsd] freeSatThread::StopRun: to closefd
2022-08-20 04:20:00.686 [sectionsd] freeSatThread::StopRun: to unlock
2022-08-20 04:20:00.692 [sectionsd] broadcasting...
2022-08-20 04:20:00.698 [sectionsd] pausing...
2022-08-20 04:20:00.703 [sectionsd] join Housekeeping
2022-08-20 04:20:00.709 [sectionsd] join TOT
2022-08-20 04:20:00.711 [sectionsd] timeThread::Stop: to broadcast
2022-08-20 04:20:00.715 [sectionsd] timeThread stopped
2022-08-20 04:20:00.722 [sectionsd] timeThread::Stop: to join
2022-08-20 04:20:00.728 [sectionsd] timeThread::Stop: to close
2022-08-20 04:20:00.732 [sectionsd] join EIT
2022-08-20 04:20:00.737 [sectionsd] eitThread::Stop: to broadcast
2022-08-20 04:20:00.742 [sectionsd] eitThread stopped
2022-08-20 04:20:00.745 [sectionsd] eitThread::Stop: to join
2022-08-20 04:20:00.752 [sectionsd] eitThread::Stop: to close
2022-08-20 04:20:00.758 [sectionsd] join CN
2022-08-20 04:20:00.763 [sectionsd] cnThread::Stop: to broadcast
2022-08-20 04:20:00.767 [sectionsd] cnThread: stop eit update filter (active)
2022-08-20 04:20:00.773 [sectionsd] cnThread::Stop: to join
2022-08-20 04:20:00.787 [sectionsd] cnThread stopped
2022-08-20 04:20:00.787 [sectionsd] cnThread::Stop: to close
2022-08-20 04:20:00.793 [sectionsd] join FSEIT
2022-08-20 04:20:00.799 [sectionsd] freeSatThread::Stop: to broadcast
2022-08-20 04:20:00.804 [sectionsd] freeSatThread stopped
2022-08-20 04:20:00.807 [sectionsd] freeSatThread::Stop: to join
2022-08-20 04:20:00.813 [sectionsd] freeSatThread::Stop: to close
2022-08-20 04:20:00.821 [sectionsd] stopped
sectionsd shutdown done
TuxTxt stopping subtitle thread ...
zapit shutdown
stopPlayBack: stopping...
stopPlayBack: stopped
CSAPI (PVR-PLAY): cPlayback::Close
[zapit] saving channel, apid 13ee sub pid 0 mode 0 volume 50
[zapit.cpp:StopPlayBack:2450] standby 0 playing 0 forced 0 send_pmt 1
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 STOP src 0 mask 1 -> 0 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:385]  (newmask == 0)
[capmt.cpp:SetMode:442] CI: not used, disabling TS
[femanager.cpp:saveSettings:355] fe0
[femanager.cpp:saveSettings:355] fe1
[femanager.cpp:saveSettings:355] fe2
[femanager.cpp:saveSettings:355] fe3
[ConfigFile] saving /var/tuxbox/config/zapit/frontend.conf
[zapit.cpp:run:2887] shutdown started
CSAPI (AUDIO): PCM: Stopping RCA port
CSAPI (AUDIO): PCM: Stopping SPDIF port
CSAPI (AUDIO): PCM: Stopping HDMI port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from SPDIF port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from HDMI port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from RCA port
CSAPI (VIDEO): Stop: blank 1
[zapit.cpp:run:2924] demuxes/decoders deleted
[frontend.cpp:Close:362] [fe0/0] close frontend fd 27
[frontend.cpp:Close:362] [fe0/1] close frontend fd 28
[frontend.cpp:Close:362] [fe0/2] close frontend fd 29
[zapit.cpp:run:2934] frontend(s) deleted
[zapit.cpp:run:2936] stopping CA
CSAPI (CA): Exiting thread
CSAPI (DVB-CI): slot 0 was initialized, stopping
CSAPI (DVB-CI): slot 0 was initialized, wait for stop..
CSAPI (DVB-CI): 0: Driver requested to stop
CSAPI (DVB-CI): CNXT_DVBCI_ST_STOPPED State...
CSAPI (DVB-CI): 0: DVBCI - Task Terminating
[zapit.cpp:run:2940] shutdown complete
zapit shutdown done
CS_API: chip is APOLLO
cnxt_scd_close succeeded - Handle = 0x0.
[ConfigFile] saving /var/tuxbox/config/neutrino.conf
entering off state
timer_minutes: 27683543
CS_API: chip is APOLLO
CSAPI (VIDEO): StopPicture
CSAPI (VIDEO): setBlank: 1
CSAPI (VIDEO): setAspectRatio: aspect -1 mode 2
CSAPI (VIDEO): VIDEO: Set aspect mode to none
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Standby 0 -> 1
CSAPI (HDMI-CEC): Power Status: ON -> STANDBY
CSAPI (HDMI-CEC): Broadcast Standby
CSAPI (VIDEO): setBlank: 1
CSAPI (HDMI-CEC): Power Status: STANDBY
[neutrino] This is the end. Exiting with code 2
called Close() but handle closed, exiting
Aug 20 04:20:02 Tank user.info start_neutrino[919]: Neutrino exited with exit code 2
Aug 20 04:20:02 Tank user.notice shutdown[9628]: shutting down for system reboot
INIT: Switching to runlevel: 6
INIT: Sending processes configured via /etc/inittab the TERM signal
Aug 20 04:20:07 Tank user.info rc[9641]: running /etc/rc6.d/K01camd stop
Aug 20 04:20:07 Tank user.info K01camd[9646]: stop camd_datefix
Aug 20 04:20:07 Tank user.info K01camd[9646]: stop doscam
Aug 20 04:20:08 Tank user.info rc[9641]: running /etc/rc6.d/K01user-initscripts stop
Aug 20 04:20:08 Tank user.info K01user-initscripts[9659]: run users initscripts stop ...
Aug 20 04:20:08 Tank user.info rc[9641]: running /etc/rc6.d/K20emmrd stop
Aug 20 04:20:09 Tank user.info rc[9641]: running /etc/rc6.d/K20fritzcallmonitor stop
Aug 20 04:20:09 Tank user.info rc[9641]: running /etc/rc6.d/K20openvpn stop
sh: you need to specify whom to kill
Aug 20 04:20:12 Tank user.info rc[9641]: running /etc/rc6.d/K20plugins-hide stop
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K20tuxcald stop
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K20tuxmaild stop
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K25autofs stop
Aug 20 04:20:14 Tank user.info K25autofs[9734]: stopping
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K25dropbear stop
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K25inadyn stop
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K25minidlnad stop
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K25nfsd stop
Aug 20 04:20:14 Tank daemon.notice rpc.mountd[806]: Caught signal 15, un-registering and exiting.
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K25samba stop
stopping nmbd ...done
stopping smbd ...done
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K25ushare stop
Aug 20 04:20:14 Tank user.info rc[9641]: running /etc/rc6.d/K25vsftpd stop
Aug 20 04:20:15 Tank user.info rc[9641]: running /etc/rc6.d/K25xupnpd stop
Aug 20 04:20:15 Tank user.info rc[9641]: running /etc/rc6.d/K50crond stop
Aug 20 04:20:15 Tank user.info rc[9641]: running /etc/rc6.d/K50inetd stop
Aug 20 04:20:15 Tank user.info rc[9641]: running /etc/rc6.d/K97sdX stop
Aug 20 04:20:15 Tank user.info K97sdX[9783]: stopping /dev/sda
Aug 20 04:20:16 Tank user.info K97sdX[9783]: stopping /dev/sdb
Aug 20 04:20:16 Tank user.info rc[9641]: running /etc/rc6.d/K98fstab stop
Aug 20 04:20:16 Tank user.info K98fstab[9790]: unmount all netfs stuff from /etc/mtab
Aug 20 04:20:16 Tank user.info rc[9641]: running /etc/rc6.d/K98network stop
Aug 20 04:20:16 Tank user.info K98network[9795]: Deconfiguring network ...
Aug 20 04:20:16 Tank user.info rc[9641]: running /etc/rc6.d/K98rootx-mount stop
umount: can't unmount /mnt/root0: No such file or directory
Aug 20 04:20:16 Tank user.info rc[9641]: running /etc/rc6.d/K98syslogd stop
Aug 20 02:20:16 Tank syslog.info syslogd exiting
Aug 20 02:20:16 Tank user.info rcK[9822]: start
Aug 20 02:20:19 Tank user.info rcK[9822]: done
[31669.390818] Restarting system.
                                 ▒

Starting Microloader ASM built on окт 08 2015 09:37:26...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: APOLLO
Found External Realtek 8211EG PHY on GMAC0
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
MMC:No device found
BOX MAC OK!
BOX: Type: TANK Rev: 84900104
Setting up default ATAG list...
Jumping to U-Boot ...
BOOT_TIME: 1010 ms since POR

--------------------------------------------------------------------------------
| U-Boot 2009.08-00067-gebbd4b2 (Apr 03 2015 - 16:35:07)               CST HDx |
|------------------------------------------------------------------------------|
| Chipset information                                                          |
| Vendor: NXP       Type: Apollo           Revision: M1        Fuses: 00156D66 |
|------------------------------------------------------------------------------|
| Clock information                                                            |
| *** not available yet ***                                                    |
|------------------------------------------------------------------------------|
| Frontpanel information                                                       |
| Vendor: CST       Version: 4.1           Display: OLED (256 x 64 px)         |
|------------------------------------------------------------------------------|
| Memory configuration                                                         |
| Start    | End      | Type    | Description                                  |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM     | System main memory bank #0 (256M)            |
| 20000000 | 2FFFFFFF | RAM     | System main memory bank #1 (256M)            |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
  *** Warning - bad CRC or SFC, using default environment
| 00000000*| 3FFFFFFF*| NAND    | Toshiba TC58NVG3S0F 8G 3.3V 8-bit            |
|------------------------------------------------------------------------------|
| Network configuration                                                        |
| MAC: LIP 6300                    address: 00-C5-5C-65-62-E9                  |
--------------------------------------------------------------------------------

Hit any key to stop autoboot:  0

SFC read: offset 0x100000, size 0x300000
 3145728 bytes read: OK
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   NI Apollo Kernel
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2971120 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.10.93 (neutrino-images@nisrv) (gcc version 6.3.120170109 (crosstool-NG crosstool-ng-1.23.0-36-g1dbb06f2-dirty) ) #1 SMP Tue Aug 16 00:25:42 CEST 2022
[    0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Early platform io descriptors mapping...
[    0.000000] PERCPU: Embedded 7 pages/cpu @80910000 s5952 r8192 d14528 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 246960k/246960k available, 277328k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80679dc4   (6600 kB)
[    0.000000]       .init : 0x8067a000 - 0x806a9740   ( 190 kB)
[    0.000000]       .data : 0x806aa000 - 0x806ebd60   ( 264 kB)
[    0.000000]        .bss : 0x806ebd60 - 0x80707424   ( 110 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU debugfs-based tracing is enabled.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:388
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] smp_twd: clock not found -2
[    0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttyS0] enabled
[    0.254457] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[    0.342790] pid_max: default: 32768 minimum: 301
[    0.347631] Mount-cache hash table entries: 512
[    0.354205] CPU: Testing write buffer coherency: ok
[    0.359347] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.364995] Setting up static identity map for 0x803dd018 - 0x803dd070
[    0.371543] L310 cache controller enabled
[    0.375465] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[    0.384192] Brought up 1 CPUs
[    0.387069] SMP: Total of 1 processors activated (1196.85 BogoMIPS).
[    0.393394] CPU: All CPU(s) started in SVC mode.
[    0.398762] devtmpfs: initialized
[    0.409019] NET: Registered protocol family 16
[    0.414094] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.546837] GMAC0: active interface is 6
[    0.550759] ChipID=0x1 ChipRevID=0x2
[    0.554353] nx_dmac: Registered with 8 channels
[    0.563622] bio: create slab <bio-0> at 0
[    0.568134] GPIO: base febd5000 (phys e06d5000)
[    0.572842] GPIO: base feb69000 (phys e0669000)
[    0.577771] SCSI subsystem initialized
[    0.581922] usbcore: registered new interface driver usbfs
[    0.587339] usbcore: registered new interface driver hub
[    0.592737] usbcore: registered new device driver usb
[    0.597788] pps_core: LinuxPPS API ver. 1 registered
[    0.602669] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.611742] PTP clock support registered
[    0.617441] Switching to clocksource timer_us
[    0.628468] NET: Registered protocol family 2
[    0.633639] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.640713] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.647120] TCP: Hash tables configured (established 4096 bind 4096)
[    0.653441] TCP: reno registered
[    0.656584] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.662420] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.668893] NET: Registered protocol family 1
[    0.673514] RPC: Registered named UNIX socket transport module.
[    0.679331] RPC: Registered udp transport module.
[    0.684030] RPC: Registered tcp transport module.
[    0.688662] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.695233] PM: STB Platform power mgmt initialization.
[    0.820989] cfg80211: Calling CRDA to update world regulatory domain
[    0.828095] bounce pool size: 64 pages
[    0.837967] NFS: Registering the id_resolver key type
[    0.843013] Key type id_resolver registered
[    0.847094] Key type id_legacy registered
[    0.851096] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.857502] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.864870] msgmni has been set to 482
[    0.869587] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.876935] io scheduler noop registered
[    0.880776] io scheduler deadline registered
[    0.885180] io scheduler cfq registered (default)
[    0.890231] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip 3106
[    0.901705] loop: module loaded
[    0.905159] ahci-stb e0638000.sata: unable to find phy
[    0.910261] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[    0.916328] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[    0.923574] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[    0.930578] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[    0.939337] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmppio slum part ccc sxs
[    0.949789] scsi0 : ahci_platform
[    0.953392] scsi1 : ahci_platform
[    0.956810] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[    0.964644] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[    0.973271] NAND device: Manufacturer ID: 0x98, Chip ID: 0xd3 (Toshiba TC58NVG3S0F 8G 3.3V 8-bit), 1024MiB, page size: 4096, OOB size: 232
[    0.986097] Bad block table found at page 262080, version 0x01
[    0.992473] Bad block table found at page 262016, version 0x01
[    0.998658] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand
[    1.005632] Creating 3 MTD partitions on "e0631000.flash_nand":
[    1.011487] 0x000000000000-0x000010000000 : "root0"
[    1.017346] 0x000010000000-0x000012000000 : "var"
[    1.022821] 0x000012000000-0x000040000000 : "root1"
[    1.030480] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[    1.036219] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[    1.041881] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc
[    1.048735] Creating 5 MTD partitions on "e0632000.flash_sfc":
[    1.054541] 0x000000000000-0x000000040000 : "uldr"
[    1.060300] 0x000000040000-0x0000000c0000 : "u-boot"
[    1.066020] 0x0000000c0000-0x0000000e0000 : "env"
[    1.071507] 0x0000000e0000-0x000000100000 : "spare"
[    1.077117] 0x000000100000-0x000000400000 : "kernel"
[    1.082993] tun: Universal TUN/TAP device driver, 1.6
[    1.087943] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.094420]  DWMAC1000
[    1.096696] stmmac - user ID: 0x25, Synopsys ID: 0x35
[    1.101735]  Ring mode enabled
[    1.104730]  DMA HW capability register supported
[    1.109222]  Enhanced/Alternate descriptors
[    1.113566]  Enabled extended descriptors
[    1.117517]  RX Checksum Offload Engine supported (type 2)
[    1.122971]  TX Checksum insertion supported
[    1.127192]  Wake-Up On Lan supported
[    1.130868]  Enable RX Mitigation via HW Watchdog Timer
[    1.139022] libphy: stmmac: probed
[    1.142393] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.148728] eth%d: PHY ID 001cc915 at 5 IRQ POLL (stmmac-0:05)
[    1.155026] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.161477] ehci-platform: EHCI generic platform driver
[    1.166719] ehci-platform e066c000.usb: EHCI Host Controller
[    1.172313] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[    1.180206] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[    1.200131] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[    1.206281] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.212992] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.220145] usb usb1: Product: EHCI Host Controller
[    1.224968] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.230422] usb usb1: SerialNumber: e066c000.usb
[    1.235544] hub 1-0:1.0: USB hub found
[    1.239210] hub 1-0:1.0: 1 port detected
[    1.243368] ehci-platform e066d000.usb: EHCI Host Controller
[    1.248946] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[    1.256856] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[    1.280087] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[    1.286228] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.292923] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.300084] usb usb2: Product: EHCI Host Controller
[    1.304914] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.310366] usb usb2: SerialNumber: e066d000.usb
[    1.315439] hub 2-0:1.0: USB hub found
[    1.319110] hub 2-0:1.0: 1 port detected
[    1.323409] usbcore: registered new interface driver usb-storage
[    1.329428] usbcore: registered new interface driver usbserial
[    1.335756] sdhci: Secure Digital Host Controller Interface driver
[    1.341871] sdhci: Copyright(c) Pierre Ossman
[    1.346220] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[    1.353693] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[    1.362518] ata1: SATA link down (SStatus 0 SControl 300)
[    1.410087] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[    1.417058] usbcore: registered new interface driver usbhid
[    1.422563] usbhid: USB HID core driver
[    1.426614] TCP: cubic registered
[    1.429840] NET: Registered protocol family 17
[    1.434456] Key type dns_resolver registered
[    1.438727] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[    1.446263] ThumbEE CPU extension supported.
[    1.452241] ### dt-test ### No testcase data in device tree; not running tests
[    1.690092] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.841820] usb 1-1: New USB device found, idVendor=090c, idProduct=1000
[    1.848417] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.855519] usb 1-1: Product: Flash Disk
[    1.859386] usb 1-1: Manufacturer: USB
[    1.863784] usb-storage 1-1:1.0: USB Mass Storage device detected
[    1.869987] scsi2 : usb-storage 1-1:1.0
[    1.910106] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.922523] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10002, max UDMA/133
[    1.929302] ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    1.942385] ata2.00: configured for UDMA/133
[    1.947036] scsi 1:0:0:0: Direct-Access     ATA      ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
[    1.955834] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.963418] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.968695] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.974417] sd 1:0:0:0: [sda] Write Protect is off
[    1.979231] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.990171] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    2.141851] usb 2-1: New USB device found, idVendor=05e3, idProduct=0608
[    2.148449] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    2.155554] usb 2-1: Product: USB2.0 Hub
[    2.160293] hub 2-1:1.0: USB hub found
[    2.164230] hub 2-1:1.0: 4 ports detected
[    3.036437] scsi 2:0:0:0: Direct-Access     USB      Flash Disk       1100 PQ: 0 ANSI: 4
[    3.045157] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    3.051999] sd 2:0:0:0: [sdb] 7866368 512-byte logical blocks: (4.02 GB/3.75GiB)
[    3.060370] sd 2:0:0:0: [sdb] Write Protect is off
[    3.066107] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.101513]  sdb: sdb1
[    3.107980] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[    3.967614]  sda: sda1
[    3.971090] sd 1:0:0:0: [sda] Attached SCSI disk
[    6.353439] VFS: Mounted root (jffs2 filesystem) on device 31:0.
[    6.360291] devtmpfs: mounted
[    6.363456] Freeing unused kernel memory: 188K
INIT: version  booting
Jan 01 00:00:06 STB user.info rcS[47]: start
Jan 01 00:00:06 STB user.info rcS[47]: creating and mounting system directories ...
mount: mounting run on /var/run failed: No such file or directory
Jan 01 00:00:06 STB user.info var_mount.sh[74]: start update of var-partition
Jan 01 00:00:06 STB user.info var_mount.sh[74]: try to mount /dev/mtdblock1 to /var
Sat Jan  1 00:00:00 UTC 2022
Jan  1 00:00:00 Tank syslog.info syslogd started: BusyBox v1.34.1
Jan  1 00:00:00 Tank user.info service[137]: running /etc/init.d/sysctl start
* Applying /etc/sysctl.conf ...
Jan  1 00:00:00 Tank user.info service[143]: running /etc/init.d/mdev start
Jan  1 00:00:00 Tank user.info mdev[146]: mdev coldplug ...
Jan  1 00:00:01 Tank user.info mdev-mount[247]: [add] mounting /dev/sda1 to /media/sda1
Jan  1 00:00:03 Tank user.info mdev-mount[294]: [add] mounting /dev/sdb1 to /media/sdb1
Jan  1 00:00:03 Tank user.info mdev[146]: scanning /sys/bus/usb/devices/ to help mdev with usb-coldplug
Jan  1 00:00:03 Tank user.info mdev[146]: usb device /sys/bus/usb/devices/1-0:1.0 found
Jan  1 00:00:03 Tank user.info mdev[146]: usb device /sys/bus/usb/devices/1-1:1.0 found
Jan  1 00:00:03 Tank user.info mdev[146]: usb device /sys/bus/usb/devices/2-0:1.0 found
Jan  1 00:00:03 Tank user.info mdev[146]: usb device /sys/bus/usb/devices/2-1:1.0 found
Jan  1 00:00:03 Tank user.info rcS[47]: Loading lnxplatnativeDrv.ko
Jan  1 00:00:03 Tank user.info rcS[47]: Loading lnxKKALDrv.ko
Jan  1 01:00:03 Tank user.info mdev-usb[319]: add 1-0 Linux 3.10.93 ehci_hcd EHCI Host Controller
Jan  1 01:00:03 Tank user.info mdev-usb[319]: type 9/0/1
Jan  1 01:00:03 Tank user.info mdev-usb[319]: 1-0 HUB Device
Jan  1 01:00:04 Tank user.info mdev-usb[359]: add 1-1 USB Flash Disk
Jan  1 01:00:04 Tank user.info mdev-usb[359]: type 8/6/80
Jan  1 01:00:04 Tank user.info mdev-usb[359]: 1-1 Mass Storage Interface
Jan  1 00:00:04 Tank user.info rcS[47]: Loading lnxnotifyqDrv.ko
Jan  1 00:00:04 Tank user.info rcS[47]: Loading lnxplatDrv.ko
Jan  1 01:00:04 Tank user.info mdev-usb[379]: add 2-0 Linux 3.10.93 ehci_hcd EHCI Host Controller
Jan  1 01:00:04 Tank user.info mdev-usb[379]: type 9/0/1
Jan  1 01:00:04 Tank user.info mdev-usb[379]: 2-0 HUB Device
Jan  1 00:00:04 Tank user.info rcS[47]: Loading lnxscsDrv.ko
Jan  1 01:00:04 Tank user.info mdev-usb[408]: add 2-1 5e3 USB2.0 Hub
Jan  1 01:00:04 Tank user.info mdev-usb[408]: type 9/0/1
Jan  1 01:00:04 Tank user.info mdev-usb[408]: 2-1 HUB Device
Jan  1 00:00:04 Tank user.info rcS[47]: Loading lnxcssDrv.ko
Jan  1 00:00:05 Tank user.info rcS[47]: Loading lnxtmasDrv.ko
Jan  1 00:00:05 Tank user.info rcS[47]: Loading lnxtmvssDrvGPL.ko
Jan  1 00:00:05 Tank user.info rcS[47]: Loading lnxtmvssDrv.ko
Jan  1 00:00:06 Tank user.info rcS[47]: Loading lnxpvrDrv.ko
Jan  1 00:00:06 Tank user.info rcS[47]: Loading lnxdvbciDrv.ko
Jan  1 00:00:06 Tank user.info rcS[47]: Loading framebuffer.ko
Jan  1 00:00:08 Tank user.info rcS[47]: Loading control.ko
Jan  1 00:00:08 Tank user.info rcS[47]: Loading frontpanel.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Creating device node cs_display
Jan  1 00:00:09 Tank user.info rcS[47]: init drivers ...
Jan  1 00:00:09 Tank user.info rcS[47]: Loading dvb-core.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading typhoon.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading a8296.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading av201x.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading sharp780x.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading dvb_api_prop.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading avl6761.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading mxl603.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading avl6211.ko
Jan  1 00:00:09 Tank user.info rcS[47]: Loading dvb_api.ko
Jan  1 00:00:14 Tank user.info rcS[47]: Loading cifs.ko
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node KAL
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node notifyq
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node platform
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node content
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node standby
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node video
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node audio
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node pvr
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node ci
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node cs_control
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node cs_ir
Jan  1 00:00:14 Tank user.info rcS[47]: Creating device node dir fb
Jan  1 00:00:14 Tank user.info service[667]: running /etc/init.d/network start
Jan 01 00:00:14 Tank user.info network[670]: Configuring network ...
Jan  1 00:00:15 Tank user.info service[698]: running /etc/init.d/ntpdate start
Jan  1 00:00:15 Tank user.info rc[47]: running /etc/rcS.d/S40coredump start
INIT: Jan  1 01:00:15 Tank daemon.info init: Entering runlevel: 3
Entering runlevel: 3
Jan  1 01:00:15 Tank user.info rc[721]: running /etc/rc3.d/S01fstab start
Jan 01 01:00:15 Tank user.info S01fstab[726]: mount all local stuff from /etc/fstab
Jan 01 01:00:15 Tank user.info S01fstab[726]: mount all netfs stuff from /var/etc/fstab
Jan  1 01:00:15 Tank user.info rc[721]: running /etc/rc3.d/S01rootx-mount start
Jan  1 01:00:15 Tank user.info S01rootx-mount[732]: mounting root1 to /mnt/root1 ...
Jan  1 01:00:22 Tank user.info rc[721]: running /etc/rc3.d/S50crond start
Jan  1 01:00:22 Tank user.info rc[721]: running /etc/rc3.d/S50inetd start
Jan  1 01:00:22 Tank user.info rc[721]: running /etc/rc3.d/S75autofs start
Jan 01 01:00:23 Tank user.info S75autofs[750]: starting
open_fopen_r:212: failed to open file: No such file or directory
Jan  1 01:00:24 Tank user.info rc[721]: running /etc/rc3.d/S75dropbear start
Jan  1 01:00:24 Tank user.info rc[721]: running /etc/rc3.d/S75inadyn start
Jan  1 01:00:24 Tank user.info rc[721]: running /etc/rc3.d/S75minidlnad start
Jan  1 01:00:24 Tank user.info rc[721]: running /etc/rc3.d/S75nfsd start
Jan  1 01:00:24 Tank daemon.notice rpc.statd[795]: Version 2.6.1 starting
Jan  1 01:00:24 Tank daemon.notice sm-notify[796]: Version 2.6.1 starting
Jan  1 01:00:24 Tank daemon.notice rpc.statd[795]: Initializing NSM state
Jan  1 01:00:24 Tank daemon.notice rpc.mountd[806]: Version 2.6.1 starting
Jan  1 01:00:24 Tank user.info rc[721]: running /etc/rc3.d/S75samba start
starting smbd ...done
starting nmbd ...done
Jan  1 01:00:25 Tank user.info rc[721]: running /etc/rc3.d/S75ushare start
Jan  1 01:00:26 Tank user.info rc[721]: running /etc/rc3.d/S75vsftpd start
Jan  1 01:00:26 Tank user.info rc[721]: running /etc/rc3.d/S75xupnpd start
Jan  1 01:00:36 Tank user.info rc[721]: running /etc/rc3.d/S80emmrd start
Jan  1 01:00:36 Tank user.info rc[721]: running /etc/rc3.d/S80fritzcallmonitor start
Jan  1 01:00:36 Tank user.info rc[721]: running /etc/rc3.d/S80openvpn start
Jan  1 01:00:36 Tank user.info rc[721]: running /etc/rc3.d/S80plugins-hide start
Jan  1 01:00:36 Tank user.info rc[721]: running /etc/rc3.d/S80tuxcald start
Jan  1 01:00:36 Tank user.info rc[721]: running /etc/rc3.d/S80tuxmaild start
Jan  1 01:00:36 Tank user.info rc[721]: running /etc/rc3.d/S98camd start
Jan 01 01:00:36 Tank user.info S98camd[862]: start camd_datefix
Jan 01 01:00:36 Tank user.info camd_datefix[865]: manipulating date ...
Aug 20 04:20:00 Tank user.info camd_datefix[865]: done (202208200420)
Aug 20 04:20:00 Tank user.info S98camd[862]: start doscam
Aug 20 04:20:00 Tank user.info rc[721]: running /etc/rc3.d/S98user-initscripts start
Aug 20 04:20:00 Tank user.info S98user-initscripts[897]: run users initscripts start ...
Aug 20 04:20:00 Tank user.info rc[721]: running /etc/rc3.d/S99rc.local start
[neutrino] Coolstream HD2 framebuffer Instance created
[fb_generic] [PNX849X Series] framebuffer 16200k video mem
[fb_accel_cs_hd2] SetMode: 32bits, red 8:16 green 8:8 blue 8:0 transp 8:24
[fb_accel_cs_hd2] 1280x720x32 line length 7680. using PNX849X Series graphics accelerator.
UKAL: Mapped whole KAL memory at 679fe000
CS_API: chip is APOLLO
Aug 20 04:20:03 Tank local0.info xupnpd[982]: ./plugins/xupnpd_youtube.lua:168: bad argument #1 to 'decode' (string expected, got nil)
[neutrino] recording dir: /media/ST1000LM024_HN-M-1/movies
[neutrino] timeshift dir: /media/ST1000LM024_HN-M-1/movies/.timeshift
[CWebChannelsSetup] loading: /var/tuxbox/webtv/webtv_usr.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webtv/plutotv.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webtv/plutotv_us.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webtv/rakutentv.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webtv/yt_live.xml
[CWebChannelsSetup] skipping: /var/tuxbox/webradio/webradio_usr.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webradio/80s80s.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webradio/90s90s.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webradio/stompfm.xml
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 173] font file: /share/fonts/neutrino.ttf
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 195] standard font family: Roboto
[neutrino] [CNeutrinoFonts] [SetupDynamicFonts - 155] dynamic font family: Roboto
[neutrino] [CNeutrinoFonts] [SetupIconFont - 297] icon font family: Font Awesome 6 Free (/usr/share/fonts/fa-solid-900.ttf)
CVFD::setlcdparameter dimm 15 power 1
CVFD::showServicename:
CVFD::ShowText: [0x10][]
CVFD::ShowText: [0x10][NI \o/]
CS_API: chip is APOLLO
[fe0/0] frontend fd 27 type 0
[fe0/0] add delivery system DVB-S (delivery_system: 5)
[fe0/0] add delivery system DVB-S2 (delivery_system: 6)
[femanager.cpp:Init:102] add fe 0
[fe0/1] frontend fd 28 type 0
[fe0/1] add delivery system DVB-S (delivery_system: 5)
[fe0/1] add delivery system DVB-S2 (delivery_system: 6)
[femanager.cpp:Init:102] add fe 1
[fe0/2] frontend fd 29 type 0
[fe0/2] add delivery system DVB-S (delivery_system: 5)
[fe0/2] add delivery system DVB-S2 (delivery_system: 6)
[femanager.cpp:Init:102] add fe 2
[fe0/3] frontend fd 30 type 0
[fe0/3] add delivery system DVB-S (delivery_system: 5)
[fe0/3] add delivery system DVB-S2 (delivery_system: 6)
[femanager.cpp:Init:102] add fe 3
[frontend.cpp:Open:198] /dev/dvb/adapter1/frontend0: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter1/frontend1: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter1/frontend2: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter1/frontend3: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter2/frontend0: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter2/frontend1: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter2/frontend2: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter2/frontend3: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter3/frontend0: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter3/frontend1: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter3/frontend2: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter3/frontend3: No such file or directory
[femanager.cpp:Init:118] found 4 frontends, 5 demuxes
CSAPI (DEMUX): cTSRoute: open TS route on unit 0
CSAPI (DEMUX): cTSRoute: open TS route on unit 1
CSAPI (DEMUX): cTSRoute: open TS route on unit 4
CSAPI (DEMUX): cTSRoute: open TS route on unit 3
CSAPI (DEMUX): cTSRoute: open TS route on unit 6
CSAPI (VIDEO): Creating REGION on PLANE CNXT_VPP_PLANE_VIDEO_MAIN (0) on UNIT 0
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 0
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to pan&scan
CSAPI (VIDEO): Standby 1 -> 0
CSAPI (HDMI-CEC): Power Status: STANDBY -> ON
CSAPI (HDMI-CEC): Power Status: ON
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to RCA
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to HDMI
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to SPDIF
CSAPI (AUDIO): PCM: Starting RCA port
CSAPI (AUDIO): PCM: Starting SPDIF port
CSAPI (VIDEO): Attaching VIDEO buffer to decoder
>>>>>[src/gui/osd_helpers.cpp - setVideoSystem:216] before SetVideoSystem:
                var.xres        : 1280, var.yres    :  720, var.yres_virtual: 1440
                fix.line_length : 7680, fix.smem_len: 16588800 Byte
CSAPI (VIDEO): VIDEO: changing to HD: 8: 1080i 50Hz    (SD: PAL       )
CSAPI (VIDEO): HD Mode: 1920x1080 FrameRate 2
CSAPI (VIDEO): SD Mode: 720x576 FrameRate 2
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 0
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to pan&scan
>>>>>[src/gui/osd_helpers.cpp - setVideoSystem:229] after SetVideoSystem:
                var.xres        : 1280, var.yres    :  720, var.yres_virtual: 1440
                fix.line_length : 7680, fix.smem_len: 16588800 Byte
>>>>>[changeOsdResolution:75] osd mode: OSDMODE_720 => OSDMODE_720, automode: false, forceOsdReset: false
[fb_accel_cs_hd2] SetMode: 32bits, red 8:16 green 8:8 blue 8:0 transp 8:24
[fb_accel_cs_hd2] 1280x720x32 line length 7680. using PNX849X Series graphics accelerator.
CSAPI (AUDIO): PCM: Starting HDMI port
CSAPI (VIDEO): Creating REGION on PLANE CNXT_VPP_PLANE_VIDEO_PIP (1) on UNIT 1
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 0
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to pan&scan
CSAPI (VIDEO): Attaching VIDEO buffer to decoder
CSAPI (AUDIO): setVolume: in 50 atten -14000
[zapit] Loading services, channel size 256 ..
[getservices.cpp:LoadServices:917] Loading satellites...
[getservices.cpp:FindTransponder:623] going to parse dvb-s provider Astra (19.2E)
[zapit] 1642 services loaded (1642)...
[zapit] service loading took: 161 msec
[zapit.cpp:PrepareChannels:1192] LoadServices: success
[bouquets.cpp:readEPGMapping:1432] read /var/tuxbox/config/zapit/epgmap.xml
[bouquets.cpp:parseBouquetsXml:418] reading bouquets from /var/tuxbox/config/zapit/bouquets.xml
[bouquets.cpp:parseBouquetsXml:520] total: 64 bouquets
[bouquets.cpp:loadWebchannels:888] Loading webtv from /var/tuxbox/webtv/webtv_usr.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webtv from /usr/share/tuxbox/neutrino/webtv/plutotv.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webtv from /usr/share/tuxbox/neutrino/webtv/plutotv_us.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webtv from /usr/share/tuxbox/neutrino/webtv/rakutentv.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webtv from /usr/share/tuxbox/neutrino/webtv/yt_live.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webradio from /var/tuxbox/webradio/webradio_usr.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webradio from /usr/share/tuxbox/neutrino/webradio/80s80s.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webradio from /usr/share/tuxbox/neutrino/webradio/90s90s.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webradio from /usr/share/tuxbox/neutrino/webradio/stompfm.xml ...
[bouquets.cpp:parseBouquetsXml:418] reading bouquets from /var/tuxbox/config/zapit/ubouquets.xml
[bouquets.cpp:parseBouquetsXml:520] total: 158 bouquets
############## CBouquetManager::makeRemainingChannelsBouquet: numbers start at: tv 1 radio 1 ############
[zapit] bouquet loading took: 1527 msec
[zapit.cpp:Start:2705] channels have been loaded succesfully
[zapit.cpp] diseqc type = 0
[femanager.cpp:loadSettings:247] load config for fe0
[femanager.cpp:loadSettings:247] load config for fe1
[femanager.cpp:loadSettings:247] load config for fe2
[femanager.cpp:loadSettings:247] load config for fe3
[femanager.cpp:linkFrontends:427] linking..
[femanager.cpp:linkFrontends:454] Frontend #1: link to master 0 as LOOP
[femanager.cpp:linkFrontends:469] Frontend #0: is master, with loop: yes, with rotor: no
[frontend.cpp:setDiseqcType:1679] fe0: NO_DISEQC
[femanager.cpp:linkFrontends:471] Frontend #1: is LOOP, master 0
[frontend.cpp:setDiseqcType:1679] fe1: NO_DISEQC
[femanager.cpp:linkFrontends:478] Frontend #2: is independent
[frontend.cpp:setDiseqcType:1679] fe2: NO_DISEQC
[frontend.cpp:Close:362] [fe0/3] close frontend fd 30
[femanager.cpp:linkFrontends:495] pip demux: 4
CSAPI (API): MessageQueue: queue opened with name CA-QUEUE (0000001e)
CS_API: chip is APOLLO
[zapit] GetConfig...
CSAPI (AUDIO): SetSRS: IQ yes NMGR no algo 1 level 100
[zapit] starting... tid 1046
CSAPI (DVB-CI): slot 0 initialized
CSAPI (AUDIO): SetHdmiDD AUTO
CSAPI (AUDIO): SetSpdifDD ON
CSAPI (AUDIO): EnableAnalogOut ON
[zapit] sdt monitor started
CSAPI (API): MessageQueue: queue opened with name DVBCI Queue0 (0000002a)
CSAPI (DVB-CI): Slot task starting!
[neutrino] [CVideoSettings] [setupVideoSystem - 657], setup video system...
>>>>>[changeOsdResolution:75] osd mode: OSDMODE_720 => OSDMODE_720, automode: true, forceOsdReset: false
[fb_accel_cs_hd2] SetMode: 32bits, red 8:16 green 8:8 blue 8:0 transp 8:24
[fb_accel_cs_hd2] 1280x720x32 line length 7680. using PNX849X Series graphics accelerator.
[neutrino] [CVideoSettings] [initVideoSettings - 608], init video settings...
CS_API: chip is APOLLO
CSAPI (VIDEO): Changing to analog mode 310 for revision 9
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 2
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to none
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 2
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to none
CSAPI (VIDEO): SetDBDR: off
CSAPI (VIDEO): SetAutoModes: NTSC          enabled
CSAPI (VIDEO): SetAutoModes: SECAM         enabled
CSAPI (VIDEO): SetAutoModes: PAL           enabled
CSAPI (VIDEO): SetAutoModes: 480p          enabled
CSAPI (VIDEO): SetAutoModes: 576p          enabled
CSAPI (VIDEO): SetAutoModes: 720p 60Hz     enabled
CSAPI (VIDEO): SetAutoModes: 1080i 60Hz    enabled
CSAPI (VIDEO): SetAutoModes: 720p 50Hz     enabled
CSAPI (VIDEO): SetAutoModes: 1080i 50Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 24Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 25Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 50Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 60Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 23.97Hz enabled
CSAPI (VIDEO): SetAutoModes: 1080p 29.97Hz enabled
CSAPI (VIDEO): SetControl: BRIGHTNESS to 0
CSAPI (VIDEO): SetControl: CONTRAST to 0
CSAPI (VIDEO): SetControl: SATURATION to 0
[neutrino] [CVideoSettings] [changeNotify - 734], SD OSD enable: 1
CSAPI (DVB-CI): Starting DVBCI Slot Task 0  ***
CSAPI (DVB-CI): CNXT_DVBCI_ST_NOCARD
CSAPI (VIDEO): ShowPicture: /var/tuxbox/icons/start.jpg
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Video Picture Information
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Decode Dimensions:   (1280 x 720)
CSAPI (VIDEO): Display Extension Info Present:   No
CSAPI (VIDEO): Aspect Ratio: OTHER (0) Frame Rate:   0 (0)
CSAPI (VIDEO): Color Space:  0 Interlaced:   No
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): setBlank: 0
[rcinput:checkdev] /dev/input mtime changed
[rcinput:open] opened /dev/input/nevis_ir (fd 49) ev 0x2
CRCInput::set_rc_hw: Set IOCTRL : IOC_IR_SET_PRI_PROTOCOL, 00400
CRCInput::set_rc_hw: Set IOCTRL : IOC_IR_SET_PRI_ADDRESS,  0FF80
[zapit.cpp:leaveStandby:2522] standby 1 recording 0
[zapit.cpp:ZapIt:533] [zapit] zap to Das Erste HD (b45403fb0001283d tp 2ce500c003fb0001)
[zapit] GetConfig...
CSAPI (DEMUX): Demux #1 <= source 0
[femanager.cpp:allocateFE:758] pip demux: 4
[zapit.cpp:StopPlayBack:2450] standby 0 playing 0 forced 0 send_pmt 1
CSAPI (DEMUX): Demux #0 <= source 0
[fe0/0] tune to 11493000 DVB-S2 8PSK 2/3 H/L srate 22000000 pli -1 plc 0 plm 1 (tuner 1743000 offset 9750000 timeout 4000)
[frontend.cpp:setFrontend:1542] [fe0/0] tuner pilot 2 (feparams 2)

[frontend.cpp:getEvent:804] [fe0/0] ******** FE_HAS_LOCK: freq 1743000
[fe0/0] tuning took: 248 msec (min 248 max 248)
[zapit] parsing pmt pid 0x13EC (Das Erste HD)
[subtitles] DVBSub: PID=0x13f1, lang=deu, cpageid=0001, apageid=0001
[zapit] channel found, audio pid 13ee, subtitle pid 0 mode 0 volume 50
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 START src 0 mask 0 -> 1 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:337]  socket only
[pmt] set update filter, sid 0x283d pid 0x13ec version 3
CSAPI (CA): GUI not ready to receive messages!
[timerd] wakeup from standby: no
[neutrino CEC Settings] setCECSettings init CEC settings...
CSAPI (HDMI-CEC): Physical Address: 1.0.0.0
CSAPI (CA): GUI not ready to receive messages!
CSAPI (HDMI-CEC): Device free (Logical Address: 03)
[pwrmngr.cpp:Init:82] cnxt_scd_init: **** ERROR **** CNXT_STATUS_ALREADY_INIT
CSAPI (POWER-CLK): cnxt_scd_open succeeded - Handle = 0x90410bb8.
CStreamManager::Listen: on 31339, fd 48
CSAPI (HDMI-CEC): Initiator: 00, Destination 0F, Opcode 00A0 data bytes: 00 80 45 20 00 00)
CSAPI (HDMI-CEC): Opcode: A0, Function: [Vendor Command With Id]
timerd startup, tid 1117
2022-08-20 04:20:10[yhttpd] Webserver nhttpd/3.4.1 (yhttpd_core/1.3.2) tid 1120
Starting STREAM thread keeper, tid 1121
.577 [sectionsd] start
2022-08-20 04:20:10.604 [sectionsd] Caching: 14 days, 360 hours Extended Text, max 60000 events, Events are old 1 hours after end time
2022-08-20 04:20:10.605 [sectionsd] NTP: enabled, command /usr/sbin/ntpdate 0.de.pool.ntp.org
CSAPI (HDMI-CEC): Initiator: 00, Destination 0F, Opcode 00A0 data bytes: 00 80 45 20 00 00)
CSAPI (HDMI-CEC): Opcode: A0, Function: [Vendor Command With Id]
2022-08-20 04:20:10.664 [sectionsd] starting
2022-08-20 04:20:10.666 [sectionsd] SIevent size: 88
2022-08-20 04:20:10.668 [sectionsd] ====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
2022-08-20 04:20:10.727 [sectionsd] timeThread::run:: starting, pid 942 (1691641008)
2022-08-20 04:20:10.735 2022-08-20 04:20:10.744 [sectionsd] eitThread::run:: starting, pid 942 (1689543856)
2022-08-20 04:20:10.753 [sectionsd] freeSatThread::run:: starting, pid 942 (1687446704)
[sectionsd] cnThread::run:: starting, pid 942 (1693738160)
CInfoIcons::Init() reports 5 entries
CSAPI (DVB-CI): CamPresent: state 2
CI: CAM not found
CSAPI (DVB-CI): CamPresent: state 2
CI: CAM not found
[yhttpd] Webserver starting...
[neutrino] menue setup
[neutrino] init menus...
[neutrino] mediaplayer menu instance created
[network config] Instance created
[neutrino] [CNetworkSetup]      [getInstance - 90],  Instance created
CS_API: chip is APOLLO
CS_API: chip is APOLLO
[neutrino] ScanSetup Instance created
[mb]->refreshBrowserList
[mb]->refreshFilterList 20
[ConfigFile] Unable to open file /var/tuxbox/config/bookmarks for reading.
[neutrino CMoviePlayerGui] Instance created...
[neutrino] integratePlugins: add Favoriten sichern
[neutrino] integratePlugins: add Benutzer-Bouquets
[neutrino] registering as event client
[neutrino] had to wait 0 ms for timerd start...
CSAPI (AUDIO): SetMute off
[sdt monitor] wakeup...
CSAPI (HDMI-CEC): Initiator: 00, Destination 0F, Opcode 00A0 data bytes: 00 80 45 20 00 00)
CSAPI (HDMI-CEC): Opcode: A0, Function: [Vendor Command With Id]
CSAPI (HDMI-CEC): Initiator: 00, Destination 0F, Opcode 00A0 data bytes: 00 80 45 20 00 00)
CSAPI (HDMI-CEC): Opcode: A0, Function: [Vendor Command With Id]
CSAPI (VIDEO): StopPicture
CSAPI (VIDEO): setBlank: 1
CSAPI (VIDEO): setAspectRatio: aspect -1 mode 2
CSAPI (VIDEO): VIDEO: Set aspect mode to none
CSAPI (DVB-CI): CamPresent: state 2
CI: CAM not found
[neutrino] Creating channels lists...
[neutrino] got 1248 TV and 252 RADIO channels
[neutrino] all channels took: 5 msec
[neutrino] created Astra (19.2E) (192) bouquet with 1083 TV and 211 RADIO channels
[neutrino] sat took: 15 msec
[neutrino] got 165 WebTV channels
2022-08-20 04:20:14.442 [sectionsd] Reading data from file: /media/Flash_Disk-1/epg/index.xml
[neutrino] got 41 WebRadio channels
[neutrino] sats took: 33 msec
[neutrino] got 123 TV and 40 RADIO bouquets
[neutrino] took: 51 msec
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2505] newmode 0 sort old -1 new 0
[neutrino.cpp:tvMode:4903] rezap 1 current mode MODE_TV
CVFD::showServicename:
CVFD::ShowText: [0x10][]
CRemoteControl::tvMode
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2505] newmode 0 sort old -1 new 0
**************************** CChannelList::zapTo_ChannelID b45403fb0001283d
**************************** CChannelList::zapToChannel me 0x107a460 Alle Kanäle tuned 268435455 new Das Erste HD -> b45403fb0001283d
2022-08-20 04:20:14.589 [sectionsd] commandserviceStopped
stopPlayBack: stopping...
stopPlayBack: stopped
CChannelList::adjustToChannelID me 0x107a460 [Alle Kanäle] list size 1248 channel_id b45403fb0001283d
2022-08-20 04:20:14.601 [zapit.cpp:ZapIt:533] [zapit] zap to Das Erste HD (b45403fb0001283d tp 2ce500c003fb0001)
[zapit] saving channel, apid 13ee sub pid 0 mode 0 volume 50
[zapit] GetConfig...
CSAPI (DEMUX): Demux #1 <= source 0
[femanager.cpp:allocateFE:758] pip demux: 4
[sectionsd] cnThread[SDT] section 0 last 0 tsid 0x3fb onid 0x1 -> use
: stop eit update filter (not active[zapit.cpp:StopPlayBack:2450] standby 0 playing 0 forced 0 send_pmt 1
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 STOP src 0 mask 1 -> 0 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:385]  (newmask == 0)
[capmt.cpp:SetMode:442] CI: not used, disabling TS
CSAPI (DEMUX): Demux #0 <= source 0
)
2022-08-CSAPI (CA): GUI not ready to receive messages!
20 04:20:14.655 [sectionsd] commandserviceStopped done
2022-08-20 04:20:14.709 [sectionsd] commandserviceChanged: Service change to b45403fb0001283d demux #0
2022-08-20 04:20:14.712 [sectionsd] changeDMX: for 0x4e not ignored! even though real_pauseCounter> 0 (1)
2022-08-20 04:20:14.715 [sectionsd] changeDMX: for 0x50 not ignored! even though real_pauseCounter> 0 (1)
CHDDDestExec::exec: hd-idle = /usr/sbin/hd-idle
2022-08-20 04:20:14.836 [sectionsd] changeDMX: for 0x60 not ignored! even though real_pauseCounter> 0 (1)
[SDT] tid 3fb onid 01
[zapit] parsing pmt pid 0x13EC (Das Erste HD)
sh: you need to specify whom to kill
CSAPI (CA): GUI ready to receive messages
[CWeather]: GetWeatherDetails
################################## after all ##################################: 11833 msec
[neutrino] initialized everything
[CPlugins] could not find startup
[subtitles] DVBSub: PID=0x13f1, lang=deu, cpageid=0001, apageid=0001
[zapit] channel found, audio pid 13ee, subtitle pid 0 mode 0 volume 50
[zapit.cpp:StartPlayBack:2366] standby 0 playing 0 forced 0
[zapit] vpid 13ED apid 13EE pcr 13ED
CSAPI (AUDIO): Start: audio type 1
CSAPI (AUDIO): Start: unknown SPDIF encoded mode for stream type 1
CSAPI (AUDIO): HDMI: Checking sink AUDIO  CAPS (Found 1 descriptors)
CSAPI (AUDIO): HDMI: sink supports LPCM
CSAPI (AUDIO): HDMI: sink forcing decoded
CSAPI (AUDIO): Connecting decoded audio to SPDIF
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to SPDIF
CSAPI (AUDIO): Connecting decoded audio to HDMI
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to HDMI
CSAPI (AUDIO): Starting decoded stream
CSAPI (AUDIO): PCM: Starting Decoded PCM(DSP) stream
CSAPI (AUDIO): Input stream is MPEG
CSAPI (VIDEO): Start: pcr 0x13ed vpid 0x13ed vtype 1 (stopped)
CSAPI (AUDIO): New Audio PTS delay is 24288uS
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 START src 0 mask 0 -> 1 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:337]  socket only
[pmt] set update filter, sid 0x283d pid 0x13ec version 3
CSAPI (DVB-CI): CamPresent: state 2
CI: CAM not found
[sdt monitor] no changes.
CSAPI (VIDEO): New Video PTS delay is 20000uS
CSAPI (VIDEO): Video Picture Information
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Decode Dimensions:   (1280 x 736)
CSAPI (VIDEO): Display Extension Info Present:   Yes
CSAPI (VIDEO): Aspect Ratio: 16:9 (3) Frame Rate:   5 (1)
CSAPI (VIDEO): Color Space:  6 Interlaced:   No
CSAPI (VIDEO): Display Dimensions:   (1280 x 720)
CSAPI (VIDEO): Transfer Characteristics:   (2)
CSAPI (VIDEO): Matrix Coefficients:   (4)
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Video event CNXT_VIDEO_EVENT_PLAYING, sync took: 1410 msec
20 Aug 04:21:31 ntpdate[1133]: step time server 131.188.3.220 offset +73.546548 sec
2022-08-20 04:21:31.369 2022-08-20 04:21:31.369 2022-08-20 04:21:31.369 2022-08-20 04:21:31.369 [sectionsd] cnThread::run:: time set: Sat Aug 20 04:21:31 2022

[sectionsd] freeSatThread::run:: time set: Sat Aug 20 04:21:31 2022

[sectionsd] eitThread::run:: time set: Sat Aug 20 04:21:31 2022

[sectionsd] timeThread: Time set via NTP, going to sleep for 1800 seconds.
2022-08-20 04:21:31.645 [sectionsd] addEvent: ch 03fb0001283d running 1 (next) got_CN 0
2022-08-20 04:21:32.176 [sectionsd] addEvent: ch 03fb0001283d running 4 (curr) got_CN 2
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (b45403fb0001283d)
2022-08-20 04:21:32.285 [sectionsd] commandserviceChanged: Service change to b45403fb0001283d demux #0
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (b45403fb0001283d)
2022-08-20 04:21:32.605 [sectionsd] commandserviceChanged: Service change to b45403fb0001283d demux #0
CSAPI (VIDEO): setAspectRatio: aspect 3 mode -1
CSAPI (VIDEO): VIDEO: Set format to 16:9
CVFD::showServicename: Das Erste HD
CVFD::ShowText: [0x10][Das Erste HD]
CSAPI (VIDEO): setAspectRatio: aspect -1 mode 2
CSAPI (VIDEO): VIDEO: Set aspect mode to none
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
[ConfigFile] saving /var/tuxbox/config/timerd.conf
2022-08-20 04:21:34.219 [sectionsd] cnThread: eit update filter, ch 0x03fb0001283d, current ver 0x05  got events 3 (not active)
2022-08-20 04:21:36.329 [sectionsd] Reading data finished after 7659 ms (21 events) from https://raw.githubusercontent.com/matthuisman/i.mjh.nz/master/SamsungTVPlus/at.xml
2022-08-20 04:21:37.271 [sectionsd] Reading data finished after 8519 ms (21 events) from https://raw.githubusercontent.com/matthuisman/i.mjh.nz/master/SamsungTVPlus/de.xml
2022-08-20 04:21:37.585 [sectionsd] Reading data finished after 8897 ms (21 events) from https://raw.githubusercontent.com/matthuisman/i.mjh.nz/master/SamsungTVPlus/ch.xml
2022-08-20 04:21:41.892 [sectionsd] Reading data finished after 13303 ms (1994 events) from https://raw.githubusercontent.com/matthuisman/i.mjh.nz/master/PlutoTV/de.xml
2022-08-20 04:21:44.552 [sectionsd] Reading data finished after 15928 ms (85 events) from https://raw.githubusercontent.com/matthuisman/i.mjh.nz/master/PlutoTV/us.xml
'
Vielen Dank für Eure Antworten

Bualicher

Benutzeravatar
Bualicher
NI - VIP
Beiträge: 230
Registriert: Di 12. Apr 2016, 12:22

Re: Tank macht keinen Neustart

Beitrag #13 von Bualicher » Do 8. Sep 2022, 08:04

Hallo zusammen,

vorweg: das ist eigentlich ein Thema von der Trinity, ist aber exakt das gleiche Problem, daher ergänze ich hier um diesen einen Beitrag:

ich habe vorhin meine Trinity von einem Stand 02/22 auf aktuelles Nightly (07.09.2022) upgedatet. Der Neustart nach erfolgreichem Flash blieb leider aus und die Box ließ sich nur durch den Schalter auf der Rückseite wieder starten.

Daraufhin ein serielles Log erstellt:

Code: Alles auswählen

key: 0160 value 1, translate: 0160 -ok-
StopAutoRecord: autoshift 0
[neutrino] ExitRun(int 2)
[neutrino] hw_caps->can_shutdown: 1
[neutrino] [CLCD4l] [StopLCD4l - 186] stopping thread [0x183bb10]
[neutrino] [CLCD4l] [StopLCD4l - 190] thread [0x183bb10] joined
[neutrino] [CLCD4l] [StopLCD4l - 194] thread [(nil)] terminated
Sep  8 07:12:37 Trinity user.info service[2293]: running /etc/init.d/lcd4linux stop
2022-09-08 07:12:39.149 [sectionsd] Removed 58 old events (56246 left), zap detected 0.
stopPlayBack: stopping...
stopPlayBack: stopped
[zapit.cpp:StopPlayBack:2450] standby 0 playing 1 forced 0 send_pmt 0
CSAPI (AUDIO): PCM: Stopping Decoded PCM(DSP) stream
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): setBlank: 1
TuxTxt stopping subtitle thread ...
[dvb-sub] paused
CSAPI (VIDEO): ShowPicture: /usr/share/tuxbox/neutrino/icons/shutdown.jpg
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Video Picture Information
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Decode Dimensions:   (1280 x 720)
CSAPI (VIDEO): Display Extension Info Present:   No
CSAPI (VIDEO): Aspect Ratio: OTHER (0) Frame Rate:   0 (0)
CSAPI (VIDEO): Color Space:  0 Interlaced:   No
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): setBlank: 0
[scanepg.cpp:Stop:236] stopping live scan...
2022-09-08 07:12:40.294 [sectionsd] Request of stop scanning (now scanning).
[neutrino] Saving EPG to /mnt/autofs/NAS_Stick/EPG...
key: 0160 value 0, translate: 0160 -ok-
[sectionsd] Try to open file: /mnt/autofs/NAS_Stick/EPG/index.tmp
2022-09-08 07:12:40.946 [sectionsd] Writing Information to file: /mnt/autofs/NAS_Stick/EPG/index.tmp
2022-09-08 07:12:54.187 [sectionsd] Writing Information finished
CVFD::setlcdparameter dimm 5 power 1
stopPlayBack: stopping...
stopPlayBack: stopped
[dvb-sub] paused
[dvb-sub] stopped
Sep  8 07:12:54 Trinity user.info service[2324]: running /etc/init.d/lcd4linux stop
streaming shutdown
streaming shutdown done
timerd shutdown
[timerd] stopping timermanager thread ...
[timerd] Waiting for timermanager thread to terminate ...
[timerd] Timermanager thread terminated
[timerd] shutdown: timer type 5 state 0 announceTime: 1662909120
[timerd] shutdown: nextAnnounceTime 1662909120
[timerd] shutdown: timeset: 1 timer_minutes 27715149
timerd shutdown complete
timerd shutdown done
sectionsd shutdown
2022-09-08 07:12:54.343 [sectionsd] stopping...
2022-09-08 07:12:54.344 [sectionsd] eitThread::StopRun: to lock
2022-09-08 07:12:54.351 [sectionsd] eitThread::StopRun: to closefd
2022-09-08 07:12:54.356 [sectionsd] eitThread::StopRun: to unlock
2022-09-08 07:12:54.362 [sectionsd] cnThread::StopRun: to lock
2022-09-08 07:12:54.368 [sectionsd] cnThread::StopRun: to closefd
2022-09-08 07:12:54.375 [sectionsd] cnThread::StopRun: to unlock
2022-09-08 07:12:54.379 [sectionsd] timeThread::StopRun: to lock
2022-09-08 07:12:54.385 [sectionsd] timeThread::StopRun: to closefd
2022-09-08 07:12:54.391 [sectionsd] timeThread::StopRun: to unlock
2022-09-08 07:12:54.397 [sectionsd] freeSatThread::StopRun: to lock
2022-09-08 07:12:54.403 [sectionsd] freeSatThread::StopRun: to closefd
2022-09-08 07:12:54.409 [sectionsd] freeSatThread::StopRun: to unlock
2022-09-08 07:12:54.415 [sectionsd] broadcasting...
2022-09-08 07:12:54.421 [sectionsd] pausing...
2022-09-08 07:12:54.426 [sectionsd] join Housekeeping
2022-09-08 07:12:54.430 [sectionsd] join TOT
2022-09-08 07:12:54.435 [sectionsd] timeThread::Stop: to broadcast
2022-09-08 07:12:54.439 [sectionsd] timeThread stopped
2022-09-08 07:12:54.442 [sectionsd] timeThread::Stop: to join
2022-09-08 07:12:54.450 [sectionsd] timeThread::Stop: to close
2022-09-08 07:12:54.455 [sectionsd] join EIT
2022-09-08 07:12:54.461 [sectionsd] eitThread::Stop: to broadcast
2022-09-08 07:12:54.465 [sectionsd] eitThread stopped
2022-09-08 07:12:54.468 [sectionsd] eitThread::Stop: to join
2022-09-08 07:12:54.476 [sectionsd] eitThread::Stop: to close
2022-09-08 07:12:54.481 [sectionsd] join CN
2022-09-08 07:12:54.487 [sectionsd] cnThread::Stop: to broadcast
2022-09-08 07:12:54.491 [sectionsd] cnThread: stop eit update filter (active)
2022-09-08 07:12:54.497 [sectionsd] cnThread::Stop: to join
2022-09-08 07:12:54.514 [sectionsd] cnThread stopped
2022-09-08 07:12:54.514 [sectionsd] cnThread::Stop: to close
2022-09-08 07:12:54.520 [sectionsd] join FSEIT
2022-09-08 07:12:54.526 [sectionsd] freeSatThread::Stop: to broadcast
2022-09-08 07:12:54.531 [sectionsd] freeSatThread stopped
2022-09-08 07:12:54.534 [sectionsd] freeSatThread::Stop: to join
2022-09-08 07:12:54.542 [sectionsd] freeSatThread::Stop: to close
2022-09-08 07:12:54.548 [sectionsd] stopped
sectionsd shutdown done
TuxTxt stopping subtitle thread ...
zapit shutdown
stopPlayBack: stopping...
stopPlayBack: stopped
CSAPI (PVR-PLAY): cPlayback::Close
[zapit] saving channel, apid 13ee sub pid 0 mode 0 volume 25
[zapit.cpp:StopPlayBack:2450] standby 0 playing 0 forced 0 send_pmt 1
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 STOP src 0 mask 1 -> 0 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:385]  (newmask == 0)
HandlePMT: Card not ready!
ConaxCAS: failed to send PMT
[capmt.cpp:SetMode:442] CI: not used, disabling TS
CS_API: chip is SHINER
[femanager.cpp:saveSettings:302] fe0
[ConfigFile] saving /var/tuxbox/config/zapit/frontend.conf
[zapit.cpp:run:2887] shutdown started
CSAPI (AUDIO): PCM: Stopping RCA port
CSAPI (AUDIO): PCM: Stopping SPDIF port
CSAPI (AUDIO): PCM: Stopping HDMI port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from SPDIF port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from HDMI port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from RCA port
CSAPI (VIDEO): Stop: blank 1
[zapit.cpp:run:2924] demuxes/decoders deleted
[frontend.cpp:Close:362] [fe0/0] close frontend fd 25
[zapit.cpp:run:2934] frontend(s) deleted
[zapit.cpp:run:2936] stopping CA
CSAPI (CA): Exiting thread
ConaxCAS: Sending Stop
ConaxCAS: Sending Stop finished
ConaxCAS: Stopping cards
ConaxCAS: Stopping cards finished
ConaxCAS: Stopping DVB
ConaxCAS: thread exiting!!
ConaxCAS: Exiting DVB monitor thread
ConaxCAS: Stopping DVB finished
[zapit.cpp:run:2940] shutdown complete
zapit shutdown done
CS_API: chip is SHINER
cnxt_scd_close succeeded - Handle = 0x0.
[ConfigFile] saving /var/tuxbox/config/neutrino.conf
entering off state
timer_minutes: 27715149
CS_API: chip is SHINER
CSAPI (VIDEO): StopPicture
CSAPI (VIDEO): setBlank: 1
CSAPI (VIDEO): setAspectRatio: aspect -1 mode 1
CSAPI (VIDEO): VIDEO: Set aspect mode to letterbox
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Standby 0 -> 1
CSAPI (HDMI-CEC): Power Status: ON -> STANDBY
CSAPI (VIDEO): setBlank: 1
CSAPI (HDMI-CEC): Power Status: STANDBY
[cs_api.cpp:cs_api_exit:1184] cnxt_dvbci_drv_term: **** ERROR **** CNXT_STATUS_NOT_INIT
[neutrino] This is the end. Exiting with code 2
called Close() but handle closed, exiting
Sep  8 07:12:56 Trinity user.info start_neutrino[875]: Neutrino exited with exit code 2
Sep  8 07:12:56 Trinity user.notice shutdown[2341]: shutting down for system reboot
INIT: Switching to runlevel: 6
INIT: SendiSep  8 07:12:56 Trinity user.info rc[2343]: running /etc/rc6.d/K01camd stop
Sep 08 07:12:56 Trinity user.info K01camd[2348]: stop camd_datefix
Sep 08 07:12:56 Trinity user.info K01camd[2348]: stop doscam
Sep  8 07:12:57 Trinity user.info rc[2343]: running /etc/rc6.d/K01user-initscripts stop
Sep  8 07:12:57 Trinity user.info K01user-initscripts[2361]: run users initscripts stop ...
Sep  8 07:12:57 Trinity user.info rc[2343]: running /etc/rc6.d/K20emmrd stop
Sep  8 07:12:57 Trinity user.info rc[2343]: running /etc/rc6.d/K20fritzcallmonitor stop
Sep  8 07:12:57 Trinity user.info rc[2343]: running /etc/rc6.d/K20openvpn stop
sh: you need to specify whom to kill
Sep  8 07:13:00 Trinity user.info rc[2343]: running /etc/rc6.d/K20plugins-hide stop
Sep  8 07:13:00 Trinity user.info rc[2343]: running /etc/rc6.d/K20tuxcald stop
Sep  8 07:13:00 Trinity user.info rc[2343]: running /etc/rc6.d/K20tuxmaild stop
Sep  8 07:13:00 Trinity user.info rc[2343]: running /etc/rc6.d/K25autofs stop
Sep 08 07:13:00 Trinity user.info K25autofs[2434]: stopping
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K25dropbear stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K25inadyn stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K25minidlnad stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K25nfsd stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K25samba stop
stopping nmbd ...done
stopping smbd ...done
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K25ushare stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K25vsftpd stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K25xupnpd stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K50crond stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K50inetd stop
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K97sdX stop
Sep  8 07:13:01 Trinity user.info K97sdX[2478]: stopping /dev/sda
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K98fstab stop
Sep 08 07:13:01 Trinity user.info K98fstab[2483]: unmount all netfs stuff from /etc/mtab
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K98network stop
Sep 08 07:13:01 Trinity user.info K98network[2488]: Deconfiguring network ...
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K98rootx-mount stop
umount: can't unmount /mnt/root0: No such file or directory
Sep  8 07:13:01 Trinity user.info rc[2343]: running /etc/rc6.d/K98syslogd stop
Sep  8 05:13:01 Trinity syslog.info syslogd exiting
Sep 08 05:13:01 Trinity user.info rcK[2515]: start
Stillstand genau an der gleichen Stelle wie oben bei der Tank.

Daemon war kein einziger aktiviert.
Ich habe dann mit LCD4Linux rumgespielt und erstaunlicherweise war LCD4Linux sogar aktiviert, obwohl ich kein Display angeschlossen habe.
Habe dies dann deaktiviert und die Box neugestartet. Keine Verbesserung.
Nach dem Hardreboot habe ich dann NFS und Samba aktiviert und anschließend wieder deaktiviert.
Daraufhin hat die Box den Neustart wie gewünscht durchgeführt:

Code: Alles auswählen

key: 0160 value 1, translate: 0160 -ok-
StopAutoRecord: autoshift 0
[neutrino] ExitRun(int 2)
[neutrino] hw_caps->can_shutdown: 1
stopPlayBack: stopping...
stopPlayBack: stopped
[zapit.cpp:StopPlayBack:2450] standby 0 playing 1 forced 0 send_pmt 0
CSAPI (AUDIO): PCM: Stopping Decoded PCM(DSP) stream
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): setBlank: 1
TuxTxt stopping subtitle thread ...
[dvb-sub] paused
CSAPI (VIDEO): ShowPicture: /usr/share/tuxbox/neutrino/icons/shutdown.jpg
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Video Picture Information
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Decode Dimensions:   (1280 x 720)
CSAPI (VIDEO): Display Extension Info Present:   No
CSAPI (VIDEO): Aspect Ratio: OTHER (0) Frame Rate:   0 (0)
CSAPI (VIDEO): Color Space:  0 Interlaced:   No
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): setBlank: 0
[scanepg.cpp:Stop:236] stopping live scan...
2022-09-08 07:37:06.398 [sectionsd] Request of stop scanning (now scanning).
[neutrino] Saving EPG to /mnt/autofs/NAS_Stick/EPG...
key: 0160 value 0, translate: 0160 -ok-
[sectionsd] Try to open file: /mnt/autofs/NAS_Stick/EPG/index.tmp
2022-09-08 07:37:07.166 [sectionsd] Writing Information to file: /mnt/autofs/NAS_Stick/EPG/index.tmp
2022-09-08 07:37:20.439 [sectionsd] Writing Information finished
CVFD::setlcdparameter dimm 5 power 1
stopPlayBack: stopping...
stopPlayBack: stopped
[dvb-sub] paused
[dvb-sub] stopped
streaming shutdown
streaming shutdown done
timerd shutdown
[timerd] stopping timermanager thread ...
[timerd] Waiting for timermanager thread to terminate ...
[timerd] Timermanager thread terminated
[timerd] shutdown: timer type 5 state 0 announceTime: 1662909120
[timerd] shutdown: nextAnnounceTime 1662909120
[timerd] shutdown: timeset: 1 timer_minutes 27715149
timerd shutdown complete
timerd shutdown done
sectionsd shutdown
2022-09-08 07:37:20.547 [sectionsd] stopping...
2022-09-08 07:37:20.548 [sectionsd] eitThread::StopRun: to lock
2022-09-08 07:37:20.554 [sectionsd] eitThread::StopRun: to closefd
2022-09-08 07:37:20.560 [sectionsd] eitThread::StopRun: to unlock
2022-09-08 07:37:20.566 [sectionsd] cnThread::StopRun: to lock
2022-09-08 07:37:20.572 [sectionsd] cnThread::StopRun: to closefd
2022-09-08 07:37:20.577 [sectionsd] cnThread::StopRun: to unlock
2022-09-08 07:37:20.583 [sectionsd] timeThread::StopRun: to lock
2022-09-08 07:37:20.589 [sectionsd] timeThread::StopRun: to closefd
2022-09-08 07:37:20.595 [sectionsd] timeThread::StopRun: to unlock
2022-09-08 07:37:20.601 [sectionsd] freeSatThread::StopRun: to lock
2022-09-08 07:37:20.607 [sectionsd] freeSatThread::StopRun: to closefd
2022-09-08 07:37:20.613 [sectionsd] freeSatThread::StopRun: to unlock
2022-09-08 07:37:20.619 [sectionsd] broadcasting...
2022-09-08 07:37:20.625 [sectionsd] pausing...
2022-09-08 07:37:20.630 [sectionsd] join Housekeeping
2022-09-08 07:37:20.633 [sectionsd] join TOT
2022-09-08 07:37:20.638 [sectionsd] timeThread::Stop: to broadcast
2022-09-08 07:37:20.643 [sectionsd] timeThread stopped
2022-09-08 07:37:20.646 [sectionsd] timeThread::Stop: to join
2022-09-08 07:37:20.654 [sectionsd] timeThread::Stop: to close
2022-09-08 07:37:20.659 [sectionsd] join EIT
2022-09-08 07:37:20.664 [sectionsd] eitThread::Stop: to broadcast
2022-09-08 07:37:20.669 [sectionsd] eitThread stopped
2022-09-08 07:37:20.672 [sectionsd] eitThread::Stop: to join
2022-09-08 07:37:20.680 [sectionsd] eitThread::Stop: to close
2022-09-08 07:37:20.685 [sectionsd] join CN
2022-09-08 07:37:20.690 [sectionsd] cnThread::Stop: to broadcast
2022-09-08 07:37:20.694 [sectionsd] cnThread: stop eit update filter (active)
2022-09-08 07:37:20.701 [sectionsd] cnThread::Stop: to join
2022-09-08 07:37:20.718 [sectionsd] cnThread stopped
2022-09-08 07:37:20.718 [sectionsd] cnThread::Stop: to close
2022-09-08 07:37:20.724 [sectionsd] join FSEIT
2022-09-08 07:37:20.730 [sectionsd] freeSatThread::Stop: to broadcast
2022-09-08 07:37:20.735 [sectionsd] freeSatThread stopped
2022-09-08 07:37:20.738 [sectionsd] freeSatThread::Stop: to join
2022-09-08 07:37:20.744 [sectionsd] freeSatThread::Stop: to close
2022-09-08 07:37:20.752 [sectionsd] stopped
sectionsd shutdown done
TuxTxt stopping subtitle thread ...
zapit shutdown
stopPlayBack: stopping...
stopPlayBack: stopped
CSAPI (PVR-PLAY): cPlayback::Close
[zapit] saving channel, apid 13ee sub pid 0 mode 0 volume 50
[zapit.cpp:StopPlayBack:2450] standby 0 playing 0 forced 0 send_pmt 1
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 STOP src 0 mask 1 -> 0 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:385]  (newmask == 0)
HandlePMT: Card not ready!
ConaxCAS: failed to send PMT
[capmt.cpp:SetMode:442] CI: not used, disabling TS
CS_API: chip is SHINER
[femanager.cpp:saveSettings:302] fe0
[ConfigFile] saving /var/tuxbox/config/zapit/frontend.conf
[zapit.cpp:run:2887] shutdown started
CSAPI (AUDIO): PCM: Stopping RCA port
CSAPI (AUDIO): PCM: Stopping SPDIF port
CSAPI (AUDIO): PCM: Stopping HDMI port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from SPDIF port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from HDMI port
CSAPI (AUDIO): PCM: disconnecting Decoded PCM(DSP) stream from RCA port
CSAPI (VIDEO): Stop: blank 1
[zapit.cpp:run:2924] demuxes/decoders deleted
[frontend.cpp:Close:362] [fe0/0] close frontend fd 25
[zapit.cpp:run:2934] frontend(s) deleted
[zapit.cpp:run:2936] stopping CA
CSAPI (CA): Exiting thread
ConaxCAS: Sending Stop
ConaxCAS: thread exiting!!
ConaxCAS: Sending Stop finished
ConaxCAS: Stopping cards
ConaxCAS: Stopping cards finished
ConaxCAS: Stopping DVB
ConaxCAS: Exiting DVB monitor thread
ConaxCAS: Stopping DVB finished
[zapit.cpp:run:2940] shutdown complete
zapit shutdown done
CS_API: chip is SHINER
cnxt_scd_close succeeded - Handle = 0x0.
[ConfigFile] saving /var/tuxbox/config/neutrino.conf
entering off state
timer_minutes: 27715149
CS_API: chip is SHINER
CSAPI (VIDEO): StopPicture
CSAPI (VIDEO): setBlank: 1
CSAPI (VIDEO): setAspectRatio: aspect -1 mode 1
CSAPI (VIDEO): VIDEO: Set aspect mode to letterbox
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Standby 0 -> 1
CSAPI (HDMI-CEC): Power Status: ON -> STANDBY
CSAPI (VIDEO): setBlank: 1
CSAPI (HDMI-CEC): Power Status: STANDBY
[cs_api.cpp:cs_api_exit:1184] cnxt_dvbci_drv_term: **** ERROR **** CNXT_STATUS_NOT_INIT
[neutrino] This is the end. Exiting with code 2
called Close() but handle closed, exiting
Sep  8 07:37:22 Trinity user.info start_neutrino[893]: Neutrino exited with exit code 2
Sep  8 07:37:22 Trinity user.notice shutdown[1287]: shutting down for system reboot
INIT: Switching to runlevel: 6
INIT: Sending processes configured via /etc/inittab the TERM signal
Sep  8 07:37:22 Trinity user.info rc[1289]: running /etc/rc6.d/K01camd stop
Sep 08 07:37:22 Trinity user.info K01camd[1294]: stop camd_datefix
Sep 08 07:37:22 Trinity user.info K01camd[1294]: stop doscam
Sep  8 07:37:23 Trinity user.info rc[1289]: running /etc/rc6.d/K01user-initscripts stop
Sep  8 07:37:23 Trinity user.info K01user-initscripts[1307]: run users initscripts stop ...
Sep  8 07:37:23 Trinity user.info rc[1289]: running /etc/rc6.d/K20emmrd stop
Sep  8 07:37:23 Trinity user.info rc[1289]: running /etc/rc6.d/K20fritzcallmonitor stop
Sep  8 07:37:23 Trinity user.info rc[1289]: running /etc/rc6.d/K20openvpn stop
sh: you need to specify whom to kill
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K20plugins-hide stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K20tuxcald stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K20tuxmaild stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K25autofs stop
Sep 08 07:37:26 Trinity user.info K25autofs[1380]: stopping
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K25dropbear stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K25inadyn stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K25minidlnad stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K25nfsd stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K25samba stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K25ushare stop
Sep  8 07:37:26 Trinity user.info rc[1289]: running /etc/rc6.d/K25vsftpd stop
Sep  8 07:37:27 Trinity user.info rc[1289]: running /etc/rc6.d/K25xupnpd stop
Sep  8 07:37:27 Trinity user.info rc[1289]: running /etc/rc6.d/K50crond stop
Sep  8 07:37:27 Trinity user.info rc[1289]: running /etc/rc6.d/K50inetd stop
Sep  8 07:37:27 Trinity user.info rc[1289]: running /etc/rc6.d/K97sdX stop
Sep  8 07:37:27 Trinity user.info K97sdX[1428]: stopping /dev/sda
Sep  8 07:37:27 Trinity user.info rc[1289]: running /etc/rc6.d/K98fstab stop
Sep 08 07:37:27 Trinity user.info K98fstab[1433]: unmount all netfs stuff from /etc/mtab
Sep  8 07:37:27 Trinity user.info rc[1289]: running /etc/rc6.d/K98network stop
Sep 08 07:37:27 Trinity user.info K98network[1438]: Deconfiguring network ...
Sep  8 07:37:27 Trinity user.info rc[1289]: running /etc/rc6.d/K98rootx-mount stop
umount: can't unmount /mnt/root0: No such file or directory
Sep  8 07:37:27 Trinity user.info rc[1289]: running /etc/rc6.d/K98syslogd stop
Sep  8 05:37:27 Trinity syslog.info syslogd exiting
Sep 08 05:37:27 Trinity user.info rcK[1465]: start
Sep 08 05:37:30 Trinity user.info rcK[1465]: done
[  247.166099] Restarting system.
                                 ▒

Starting Microloader ASM built on окт 08 2015 09:37:26...
Initializing PLLs...
Initializing Clocks..
Initializing DDR PLLs/Clocks...
Initializing DDR controller...
Initializing data section...
Initializing stack ptr...
Switching to 'C' code...
Starting Microloader C...
Chip: SHINER-IP
Found Internal Ethernet PHY on GMAC0....
Checking for Guide button press ...
GCS in ISA MODE
GCS: SFC DEVICE SETUP COMPLETE
MMC:No device found
BOX MAC OK!
BOX: Type: TRINITY Rev: 84700102
Setting up default ATAG list...
Jumping to U-Boot ...
BOOT_TIME: 719 ms since POR








































--------------------------------------------------------------------------------
| U-Boot 2009.08-00067-gebbd4b2 (Apr 03 2015 - 16:35:07)               CST HDx |
|------------------------------------------------------------------------------|
| Chipset information                                                          |
| Vendor: NXP       Type: Shiner-IP        Revision: M1        Fuses: 0015706C |
|------------------------------------------------------------------------------|
| Clock information                                                            |
| *** not available yet ***                                                    |
|------------------------------------------------------------------------------|
| Frontpanel information                                                       |
| Vendor: CST       Version: 5.1           Display: none                       |
|------------------------------------------------------------------------------|
| Memory configuration                                                         |
| Start    | End      | Type    | Description                                  |
|----------+----------+---------+----------------------------------------------|
| 00000000 | 0FFFFFFF | RAM     | System main memory bank #0 (256M)            |
| 20000000 | 2FFFFFFF | RAM     | System main memory bank #1 (256M)            |
| D0000000 | D03FFFFF | S-FLASH | Eon Silicon EN25Q32 (  4M /  64K x  64)      |
  *** Warning - bad CRC or SFC, using default environment
| 00000000*| 1FFFFFFF*| NAND    | Toshiba NAND 512MiB 3,3V 8-bit               |
|------------------------------------------------------------------------------|
| Network configuration                                                        |
| MAC: LIP 6300                    address: 00-C5-5C-53-24-2A                  |
--------------------------------------------------------------------------------

Hit any key to stop autoboot:  0

SFC read: offset 0x100000, size 0x300000
 3145728 bytes read: OK
## Booting kernel from Legacy Image at 01000000 ...
   Image Name:   NI Apollo Kernel
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2971120 Bytes =  2.8 MB
   Load Address: 00008000
   Entry Point:  00008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK
Uncompressing Linux... done, booting the kernel.
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Linux version 3.10.93 (neutrino-images@nisrv) (gcc version 6.3.1 20170109 (crosstool-NG crosstool-ng-1.23.0-36-g1dbb06f2-dirty) ) #1 SMP Wed Sep 7 00:29:19 CEST 2022
[    0.000000] CPU: ARMv7 Processor [411fc091] revision 1 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Entropic Apollo STB Platform with FDT, model: CoolStream HD2 Apollo STB
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Early platform io descriptors mapping...
[    0.000000] PERCPU: Embedded 7 pages/cpu @80910000 s5952 r8192 d14528 u32768
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 130048
[    0.000000] Kernel command line: noinitrd console=ttyS0,115200n8 mtdparts=e0632000.flash_sfc:256k@0k(uldr),512k@256k(u-boot),128k@768k(env),128k@896k(spare),-(kernel);e0631000.flash_nand:256m@0k(root0),32m@256m(var),-(root1) root=mtd:root0 rootfstype=jffs2 rw
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 256MB 256MB = 512MB total
[    0.000000] Memory: 246960k/246960k available, 277328k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xa0800000 - 0xff000000   (1512 MB)
[    0.000000]     lowmem  : 0x80000000 - 0xa0000000   ( 512 MB)
[    0.000000]     modules : 0x7f000000 - 0x80000000   (  16 MB)
[    0.000000]       .text : 0x80008000 - 0x80679dc4   (6600 kB)
[    0.000000]       .init : 0x8067a000 - 0x806a9740   ( 190 kB)
[    0.000000]       .data : 0x806aa000 - 0x806ebd60   ( 264 kB)
[    0.000000]        .bss : 0x806ebd60 - 0x80707424   ( 110 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  RCU debugfs-based tracing is enabled.
[    0.000000]  Additional per-CPU info printed with stalls.
[    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:388
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] GIC CPU mask not found - kernel will fail to boot.
[    0.000000] smp_twd: clock not found -2
[    0.000000] Unable to get timer clock. Assuming 50Mhz input clock.
[    0.000000] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 4294967ms
[    0.000000] stb-timer: system timer (irq = 58, rate 50000000)
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [ttyS0] enabled
[    0.254373] Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
[    0.342789] pid_max: default: 32768 minimum: 301
[    0.347632] Mount-cache hash table entries: 512
[    0.354193] CPU: Testing write buffer coherency: ok
[    0.359337] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.364988] Setting up static identity map for 0x803dd018 - 0x803dd070
[    0.371535] L310 cache controller enabled
[    0.375457] l2x0: 8 ways, CACHE_ID 0x410004c4, AUX_CTRL 0x32421001, Cache size: 131072 B
[    0.384186] Brought up 1 CPUs
[    0.387062] SMP: Total of 1 processors activated (1196.85 BogoMIPS).
[    0.393385] CPU: All CPU(s) started in SVC mode.
[    0.398763] devtmpfs: initialized
[    0.408967] NET: Registered protocol family 16
[    0.414046] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.546889] GMAC0: active interface is 1
[    0.550813] ChipID=0x3 ChipRevID=0x2
[    0.554417] nx_dmac: Registered with 8 channels
[    0.563668] bio: create slab <bio-0> at 0
[    0.568183] GPIO: base febd5000 (phys e06d5000)
[    0.572895] GPIO: base feb69000 (phys e0669000)
[    0.577835] SCSI subsystem initialized
[    0.581978] usbcore: registered new interface driver usbfs
[    0.587400] usbcore: registered new interface driver hub
[    0.592799] usbcore: registered new device driver usb
[    0.597849] pps_core: LinuxPPS API ver. 1 registered
[    0.602738] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.611813] PTP clock support registered
[    0.617515] Switching to clocksource timer_us
[    0.628563] NET: Registered protocol family 2
[    0.633740] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.640809] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.647217] TCP: Hash tables configured (established 4096 bind 4096)
[    0.653535] TCP: reno registered
[    0.656679] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.662520] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.668989] NET: Registered protocol family 1
[    0.673604] RPC: Registered named UNIX socket transport module.
[    0.679418] RPC: Registered udp transport module.
[    0.684117] RPC: Registered tcp transport module.
[    0.688749] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.695319] PM: STB Platform power mgmt initialization.
[    0.820850] cfg80211: Calling CRDA to update world regulatory domain
[    0.827963] bounce pool size: 64 pages
[    0.837812] NFS: Registering the id_resolver key type
[    0.842865] Key type id_resolver registered
[    0.846948] Key type id_legacy registered
[    0.850951] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.857358] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    0.864728] msgmni has been set to 482
[    0.869448] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    0.876797] io scheduler noop registered
[    0.880637] io scheduler deadline registered
[    0.885044] io scheduler cfq registered (default)
[    0.890043] e06e2000.serial: ttyS0 at MMIO 0xe06e2000 (irq = 47) is a uart-ip3106
[    0.901567] loop: module loaded
[    0.905026] ahci-stb e0638000.sata: unable to find phy
[    0.910131] SATA: Adjusting los_lvl (rd_val=0x8a46, wr_val=0x8ae6)
[    0.916199] SATA: Adjusting rx_term_en0/1 (rd_val=0x2750275, wr_val=0x2770277)
[    0.923446] ahci-stb e0638000.sata: SSS flag set, parallel bus scan disabled
[    0.930455] ahci-stb e0638000.sata: AHCI 0001.0100 32 slots 2 ports 3 Gbps 0x3 impl platform mode
[    0.939216] ahci-stb e0638000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs
[    0.949668] scsi0 : ahci_platform
[    0.953269] scsi1 : ahci_platform
[    0.956679] ata1: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x100 irq 39
[    0.964514] ata2: SATA max UDMA/133 mmio [mem 0xe0638000-0xe0638fff] port 0x180 irq 39
[    0.973152] NAND device: Manufacturer ID: 0x98, Chip ID: 0xdc (Toshiba NAND 512MiB 3,3V 8-bit), 512MiB, page size: 2048, OOB size: 64
[    0.985501] Bad block table found at page 262080, version 0x01
[    0.991638] Bad block table found at page 262016, version 0x01
[    0.997686] 3 cmdlinepart partitions found on MTD device e0631000.flash_nand
[    1.004660] Creating 3 MTD partitions on "e0631000.flash_nand":
[    1.010512] 0x000000000000-0x000010000000 : "root0"
[    1.016467] 0x000010000000-0x000012000000 : "var"
[    1.021947] 0x000012000000-0x000020000000 : "root1"
[    1.029441] JEDEC ID = 0x1c3016 , Extended Device ID = 0x1c30
[    1.035236] nx_sfc e0632000.flash_sfc: en25q32 (4096 Kbytes)
[    1.040825] 5 cmdlinepart partitions found on MTD device e0632000.flash_sfc
[    1.047699] Creating 5 MTD partitions on "e0632000.flash_sfc":
[    1.053503] 0x000000000000-0x000000040000 : "uldr"
[    1.059215] 0x000000040000-0x0000000c0000 : "u-boot"
[    1.064980] 0x0000000c0000-0x0000000e0000 : "env"
[    1.070451] 0x0000000e0000-0x000000100000 : "spare"
[    1.076056] 0x000000100000-0x000000400000 : "kernel"
[    1.081924] tun: Universal TUN/TAP device driver, 1.6
[    1.086871] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.093354]  DWMAC1000
[    1.095625] stmmac - user ID: 0x25, Synopsys ID: 0x35
[    1.100668]  Ring mode enabled
[    1.103659]  DMA HW capability register supported
[    1.108152]  Enhanced/Alternate descriptors
[    1.112497]  Enabled extended descriptors
[    1.116446]  RX Checksum Offload Engine supported (type 2)
[    1.121900]  TX Checksum insertion supported
[    1.126121]  Wake-Up On Lan supported
[    1.129788]  Enable RX Mitigation via HW Watchdog Timer
[    1.145693] libphy: stmmac: probed
[    1.149009] eth%d: PHY ID 0293c411 at 0 IRQ POLL (stmmac-0:00) active
[    1.155465] eth%d: PHY ID 00000000 at 1 IRQ POLL (stmmac-0:01)
[    1.161199] eth%d: PHY ID 00000000 at 2 IRQ POLL (stmmac-0:02)
[    1.166976] eth%d: PHY ID 00000000 at 3 IRQ POLL (stmmac-0:03)
[    1.172776] eth%d: PHY ID 00000000 at 4 IRQ POLL (stmmac-0:04)
[    1.178553] eth%d: PHY ID 00000000 at 5 IRQ POLL (stmmac-0:05)
[    1.184350] eth%d: PHY ID 00000000 at 6 IRQ POLL (stmmac-0:06)
[    1.190138] eth%d: PHY ID 00000000 at 7 IRQ POLL (stmmac-0:07)
[    1.195919] eth%d: PHY ID 00000000 at 8 IRQ POLL (stmmac-0:08)
[    1.201716] eth%d: PHY ID 00000000 at 9 IRQ POLL (stmmac-0:09)
[    1.207497] eth%d: PHY ID 00000000 at 10 IRQ POLL (stmmac-0:0a)
[    1.213380] eth%d: PHY ID 00000000 at 11 IRQ POLL (stmmac-0:0b)
[    1.219247] eth%d: PHY ID 00000000 at 12 IRQ POLL (stmmac-0:0c)
[    1.225135] eth%d: PHY ID 00000000 at 13 IRQ POLL (stmmac-0:0d)
[    1.231006] eth%d: PHY ID 00000000 at 14 IRQ POLL (stmmac-0:0e)
[    1.236873] eth%d: PHY ID 00000000 at 15 IRQ POLL (stmmac-0:0f)
[    1.242756] eth%d: PHY ID 00000000 at 16 IRQ POLL (stmmac-0:10)
[    1.248623] eth%d: PHY ID 00000000 at 17 IRQ POLL (stmmac-0:11)
[    1.254506] eth%d: PHY ID 00000000 at 18 IRQ POLL (stmmac-0:12)
[    1.260380] eth%d: PHY ID 00000000 at 19 IRQ POLL (stmmac-0:13)
[    1.266248] eth%d: PHY ID 00000000 at 20 IRQ POLL (stmmac-0:14)
[    1.272133] eth%d: PHY ID 00000000 at 21 IRQ POLL (stmmac-0:15)
[    1.277998] eth%d: PHY ID 00000000 at 22 IRQ POLL (stmmac-0:16)
[    1.283882] eth%d: PHY ID 00000000 at 23 IRQ POLL (stmmac-0:17)
[    1.289749] eth%d: PHY ID 00000000 at 24 IRQ POLL (stmmac-0:18)
[    1.295632] eth%d: PHY ID 00000000 at 25 IRQ POLL (stmmac-0:19)
[    1.301506] eth%d: PHY ID 00000000 at 26 IRQ POLL (stmmac-0:1a)
[    1.307375] eth%d: PHY ID 00000000 at 27 IRQ POLL (stmmac-0:1b)
[    1.313258] eth%d: PHY ID 00000000 at 28 IRQ POLL (stmmac-0:1c)
[    1.319125] eth%d: PHY ID 00000000 at 29 IRQ POLL (stmmac-0:1d)
[    1.325008] eth%d: PHY ID 00000000 at 30 IRQ POLL (stmmac-0:1e)
[    1.330882] eth%d: PHY ID 00000000 at 31 IRQ POLL (stmmac-0:1f)
[    1.337275] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.343729] ehci-platform: EHCI generic platform driver
[    1.348977] ehci-platform e066c000.usb: EHCI Host Controller
[    1.354572] ehci-platform e066c000.usb: new USB bus registered, assigned bus number 1
[    1.362465] ehci-platform e066c000.usb: irq 93, io mem 0xe066c000
[    1.380122] ehci-platform e066c000.usb: USB 2.0 started, EHCI 1.00
[    1.386290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.393017] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.400169] usb usb1: Product: EHCI Host Controller
[    1.404974] usb usb1: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.410447] usb usb1: SerialNumber: e066c000.usb
[    1.415718] hub 1-0:1.0: USB hub found
[    1.419390] hub 1-0:1.0: 1 port detected
[    1.423567] ehci-platform e066d000.usb: EHCI Host Controller
[    1.429142] ehci-platform e066d000.usb: new USB bus registered, assigned bus number 2
[    1.437075] ehci-platform e066d000.usb: irq 94, io mem 0xe066d000
[    1.460091] ehci-platform e066d000.usb: USB 2.0 started, EHCI 1.00
[    1.466236] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.472931] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.480096] usb usb2: Product: EHCI Host Controller
[    1.484920] usb usb2: Manufacturer: Linux 3.10.93 ehci_hcd
[    1.490372] usb usb2: SerialNumber: e066d000.usb
[    1.495029] ata1: SATA link down (SStatus 0 SControl 300)
[    1.500934] hub 2-0:1.0: USB hub found
[    1.504606] hub 2-0:1.0: 1 port detected
[    1.508863] usbcore: registered new interface driver usb-storage
[    1.514940] usbcore: registered new interface driver usbserial
[    1.521274] sdhci: Secure Digital Host Controller Interface driver
[    1.527346] sdhci: Copyright(c) Pierre Ossman
[    1.531777] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 Version is 0x75
[    1.539233] stb-sdhci e0635000.sdhci: SDHC/MMC controller IP_3413 found @ [feb35000] (rev 7501)
[    1.590080] mmc0: SDHCI controller on IP_3413 [e0635000.sdhci] using ADMA
[    1.597031] usbcore: registered new interface driver usbhid
[    1.602536] usbhid: USB HID core driver
[    1.606587] TCP: cubic registered
[    1.609813] NET: Registered protocol family 17
[    1.614440] Key type dns_resolver registered
[    1.618714] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
[    1.626252] ThumbEE CPU extension supported.
[    1.632219] ### dt-test ### No testcase data in device tree; not running tests
[    1.870093] ata2: SATA link down (SStatus 0 SControl 300)
[    2.210168] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    2.367602] usb 2-1: New USB device found, idVendor=058f, idProduct=6387
[    2.374249] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.381297] usb 2-1: Product: Intenso Micro Line
[    2.385865] usb 2-1: Manufacturer: Alcor
[    2.389752] usb 2-1: SerialNumber: 02044302000082
[    2.395307] usb-storage 2-1:1.0: USB Mass Storage device detected
[    2.401925] scsi2 : usb-storage 2-1:1.0
[    3.402319] scsi 2:0:0:0: Direct-Access     Intenso  Micro Line       8.07 PQ: 0 ANSI: 4
[    3.411218] sd 2:0:0:0: Attached scsi generic sg0 type 0
[    3.418620] sd 2:0:0:0: [sda] 15257600 512-byte logical blocks: (7.81 GB/7.27 GiB)
[    3.427252] sd 2:0:0:0: [sda] Write Protect is off
[    3.432991] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    3.448150]  sda: sda1
[    3.454130] sd 2:0:0:0: [sda] Attached SCSI removable disk
[    4.554814] VFS: Mounted root (jffs2 filesystem) on device 31:0.
[    4.561604] devtmpfs: mounted
[    4.564762] Freeing unused kernel memory: 188K
INIT: version  booting
Jan 01 00:00:04 STB user.info rcS[107]: start
Jan 01 00:00:04 STB user.info rcS[107]: creating and mounting system directories ...
mount: mounting run on /var/run failed: No such file or directory
Jan 01 00:00:05 STB user.info var_mount.sh[134]: start update of var-partition
Jan 01 00:00:05 STB user.info var_mount.sh[134]: try to mount /dev/mtdblock1 to /var
Sat Jan  1 00:00:00 UTC 2022
Jan  1 00:00:00 Trinity syslog.info syslogd started: BusyBox v1.34.1
Jan  1 00:00:00 Trinity user.info service[197]: running /etc/init.d/sysctl start
* Applying /etc/sysctl.conf ...
Jan  1 00:00:00 Trinity user.info service[203]: running /etc/init.d/mdev start
Jan  1 00:00:00 Trinity user.info mdev[206]: mdev coldplug ...
Jan  1 00:00:01 Trinity user.info mdev-mount[304]: [add] mounting /dev/sda1 to /media/sda1
Jan  1 00:00:02 Trinity user.info mdev[206]: scanning /sys/bus/usb/devices/ to help mdev with usb-coldplug
Jan  1 00:00:02 Trinity user.info mdev[206]: usb device /sys/bus/usb/devices/1-0:1.0 found
Jan  1 00:00:02 Trinity user.info mdev[206]: usb device /sys/bus/usb/devices/2-0:1.0 found
Jan  1 00:00:02 Trinity user.info mdev[206]: usb device /sys/bus/usb/devices/2-1:1.0 found
Jan  1 00:00:02 Trinity user.info rcS[107]: Loading lnxplatnativeDrv.ko
Jan  1 00:00:02 Trinity user.info rcS[107]: Loading lnxKKALDrv.ko
Jan  1 01:00:02 Trinity user.info mdev-usb[358]: add 1-0 Linux 3.10.93 ehci_hcd EHCI Host Controller
Jan  1 01:00:02 Trinity user.info mdev-usb[358]: type 9/0/1
Jan  1 00:00:02 Trinity user.info rcS[107]: Loading lnxnotifyqDrv.ko
Jan  1 01:00:02 Trinity user.info mdev-usb[358]: 1-0 HUB Device
Jan  1 00:00:02 Trinity user.info rcS[107]: Loading lnxplatDrv.ko
Jan  1 01:00:03 Trinity user.info mdev-usb[400]: add 2-0 Linux 3.10.93 ehci_hcd EHCI Host Controller
Jan  1 01:00:03 Trinity user.info mdev-usb[400]: type 9/0/1
Jan  1 01:00:03 Trinity user.info mdev-usb[400]: 2-0 HUB Device
Jan  1 00:00:03 Trinity user.info rcS[107]: Loading lnxscsDrv.ko
Jan  1 01:00:03 Trinity user.info mdev-usb[426]: add 2-1 Alcor Intenso Micro Line
Jan  1 01:00:03 Trinity user.info mdev-usb[426]: type 8/6/80
Jan  1 01:00:03 Trinity user.info mdev-usb[426]: 2-1 Mass Storage Interface
Jan  1 00:00:03 Trinity user.info rcS[107]: Loading lnxcssDrv.ko
Jan  1 00:00:03 Trinity user.info rcS[107]: Loading lnxtmasDrv.ko
Jan  1 00:00:04 Trinity user.info rcS[107]: Loading lnxtmvssDrvGPL.ko
Jan  1 00:00:04 Trinity user.info rcS[107]: Loading lnxtmvssDrv.ko
Jan  1 00:00:05 Trinity user.info rcS[107]: Loading lnxpvrDrv.ko
Jan  1 00:00:05 Trinity user.info rcS[107]: Loading lnxdvbciDrv.ko
insmod: can't insert '/lib/modules/3.10.93/extra/lnxdvbciDrv.ko': No such device
Jan  1 00:00:05 Trinity user.info rcS[107]: Loading framebuffer.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading control.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading frontpanel.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Creating device node cs_display
Jan  1 00:00:07 Trinity user.info rcS[107]: init drivers ...
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading dvb-core.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading typhoon.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading a8296.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading av201x.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading sharp780x.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading dvb_api_prop.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading avl6761.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading mxl603.ko
Jan  1 00:00:07 Trinity user.info rcS[107]: Loading avl6211.ko
Jan  1 00:00:08 Trinity user.info rcS[107]: Loading dvb_api.ko
Jan  1 00:00:09 Trinity user.info rcS[107]: Loading cifs.ko
Jan  1 00:00:09 Trinity user.info rcS[107]: Creating device node KAL
Jan  1 00:00:09 Trinity user.info rcS[107]: Creating device node notifyq
Jan  1 00:00:09 Trinity user.info rcS[107]: Creating device node platform
Jan  1 00:00:09 Trinity user.info rcS[107]: Creating device node content
Jan  1 00:00:09 Trinity user.info rcS[107]: Creating device node standby
Jan  1 00:00:09 Trinity user.info rcS[107]: Creating device node video
Jan  1 00:00:09 Trinity user.info rcS[107]: Creating device node audio
Jan  1 00:00:10 Trinity user.info rcS[107]: Creating device node pvr
Jan  1 00:00:10 Trinity user.info rcS[107]: Creating device node cs_control
Jan  1 00:00:10 Trinity user.info rcS[107]: Creating device node cs_ir
Jan  1 00:00:10 Trinity user.info rcS[107]: Creating device node dir fb
Jan  1 00:00:10 Trinity user.info service[665]: running /etc/init.d/network start
Jan 01 00:00:10 Trinity user.info network[668]: Configuring network ...
Jan  1 00:00:10 Trinity user.info service[695]: running /etc/init.d/ntpdate start
Jan  1 00:00:10 Trinity user.info rc[107]: running /etc/rcS.d/S40coredump start
INIT: Jan  1 01:00:10 Trinity daemon.info init: Entering runlevel: 3
Entering runlevel: 3
Jan  1 01:00:10 Trinity user.info rc[719]: running /etc/rc3.d/S01fstab start
Jan 01 01:00:10 Trinity user.info S01fstab[724]: mount all local stuff from /etc/fstab
Jan 01 01:00:10 Trinity user.info S01fstab[724]: mount all netfs stuff from /var/etc/fstab
Jan  1 01:00:10 Trinity user.info rc[719]: running /etc/rc3.d/S01rootx-mount start
Jan  1 01:00:10 Trinity user.info S01rootx-mount[730]: mounting root1 to /mnt/root1 ...
Jan  1 01:00:13 Trinity user.info rc[719]: running /etc/rc3.d/S50crond start
Jan  1 01:00:13 Trinity user.info rc[719]: running /etc/rc3.d/S50inetd start
Jan  1 01:00:13 Trinity user.info rc[719]: running /etc/rc3.d/S75autofs start
Jan 01 01:00:14 Trinity user.info S75autofs[748]: starting
open_fopen_r:212: failed to open file: No such file or directory
Jan  1 01:00:14 Trinity user.info rc[719]: running /etc/rc3.d/S75dropbear start
Jan  1 01:00:14 Trinity user.info rc[719]: running /etc/rc3.d/S75inadyn start
Jan  1 01:00:14 Trinity user.info rc[719]: running /etc/rc3.d/S75minidlnad start
Jan  1 01:00:14 Trinity user.info rc[719]: running /etc/rc3.d/S75nfsd start
Jan  1 01:00:14 Trinity user.info rc[719]: running /etc/rc3.d/S75samba start
Jan  1 01:00:14 Trinity user.info rc[719]: running /etc/rc3.d/S75ushare start
Jan  1 01:00:14 Trinity user.info rc[719]: running /etc/rc3.d/S75vsftpd start
Jan  1 01:00:14 Trinity user.info rc[719]: running /etc/rc3.d/S75xupnpd start
Jan  1 01:00:25 Trinity user.info rc[719]: running /etc/rc3.d/S80emmrd start
Jan  1 01:00:25 Trinity user.info rc[719]: running /etc/rc3.d/S80fritzcallmonitor start
Jan  1 01:00:25 Trinity user.info rc[719]: running /etc/rc3.d/S80openvpn start
Jan  1 01:00:25 Trinity user.info rc[719]: running /etc/rc3.d/S80plugins-hide start
Jan  1 01:00:25 Trinity user.info rc[719]: running /etc/rc3.d/S80tuxcald start
Jan  1 01:00:25 Trinity user.info rc[719]: running /etc/rc3.d/S80tuxmaild start
Jan  1 01:00:25 Trinity user.info rc[719]: running /etc/rc3.d/S98camd start
Jan 01 01:00:25 Trinity user.info S98camd[829]: start camd_datefix
Jan 01 01:00:25 Trinity user.info camd_datefix[832]: manipulating date ...
Sep 08 07:37:00 Trinity user.info camd_datefix[832]: done (202209080737)
Sep 08 07:37:00 Trinity user.info S98camd[829]: start doscam
Sep  8 07:37:00 Trinity user.info rc[719]: running /etc/rc3.d/S98user-initscripts start
Sep  8 07:37:00 Trinity user.info S98user-initscripts[873]: run users initscripts start ...
Sep  8 07:37:00 Trinity user.info rc[719]: running /etc/rc3.d/S99rc.local start
[neutrino] Coolstream HD2 framebuffer Instance created
[fb_generic] [PNX849X Series] framebuffer 16200k video mem
[fb_accel_cs_hd2] SetMode: 32bits, red 8:16 green 8:8 blue 8:0 transp 8:24
[fb_accel_cs_hd2] 1920x1080x32 line length 7680. using PNX849X Series graphics accelerator.
UKAL: Mapped whole KAL memory at 67aa6000
Sep  8 07:37:03 Trinity local0.info xupnpd[922]: ./plugins/xupnpd_youtube.lua:168: bad argument #1 to 'decode' (string expected, got nil)
[cs_api.cpp:cs_api_init:1001] cnxt_dvbci_drv_init: **** ERROR **** CNXT_STATUS_FAILURE
CS_API: chip is SHINER
[neutrino] recording dir: /mnt/autofs/NAS_Filme/Aufnahmen_Neutrino
[neutrino] timeshift dir: /mnt/autofs/NAS_Filme/Aufnahmen_Neutrino/.timeshift
[CWebChannelsSetup] skipping: /var/tuxbox/webradio/webradio_usr.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webradio/80s80s.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webradio/90s90s.xml
[CWebChannelsSetup] loading: /usr/share/tuxbox/neutrino/webradio/stompfm.xml
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 173] font file: /usr/share/fonts/neutrino.ttf
[neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 195] standard font family: Roboto
[neutrino] [CNeutrinoFonts] [SetupDynamicFonts - 155] dynamic font family: Roboto
[neutrino] [CNeutrinoFonts] [SetupIconFont - 297] icon font family: Font Awesome 6 Free (/usr/share/fonts/fa-solid-900.ttf)
CVFD::setlcdparameter dimm 15 power 1
CVFD::showServicename:
CS_API: chip is SHINER
[fe0/0] frontend fd 25 type 0
[fe0/0] add delivery system DVB-S (delivery_system: 5)
[fe0/0] add delivery system DVB-S2 (delivery_system: 6)
[femanager.cpp:Init:102] add fe 0
[frontend.cpp:Open:198] /dev/dvb/adapter0/frontend1: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter0/frontend2: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter0/frontend3: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter1/frontend0: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter1/frontend1: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter1/frontend2: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter1/frontend3: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter2/frontend0: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter2/frontend1: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter2/frontend2: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter2/frontend3: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter3/frontend0: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter3/frontend1: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter3/frontend2: No such file or directory
[frontend.cpp:Open:198] /dev/dvb/adapter3/frontend3: No such file or directory
[femanager.cpp:Init:118] found 1 frontends, 5 demuxes
CSAPI (DEMUX): cTSRoute: open TS route on unit 4
CSAPI (VIDEO): Creating REGION on PLANE CNXT_VPP_PLANE_VIDEO_MAIN (0) on UNIT 0
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 0
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to pan&scan
CSAPI (VIDEO): Standby 1 -> 0
CSAPI (HDMI-CEC): Power Status: STANDBY -> ON
CSAPI (HDMI-CEC): Power Status: ON
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to RCA
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to HDMI
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to SPDIF
CSAPI (AUDIO): PCM: Starting RCA port
CSAPI (AUDIO): PCM: Starting SPDIF port
CSAPI (VIDEO): Attaching VIDEO buffer to decoder
>>>>>[src/gui/osd_helpers.cpp - setVideoSystem:216] before SetVideoSystem:
                var.xres        : 1920, var.yres    : 1080, var.yres_virtual: 2160
                fix.line_length : 7680, fix.smem_len: 16588800 Byte
CSAPI (VIDEO): VIDEO: changing to HD: 8: 1080i 50Hz    (SD: PAL       )
CSAPI (VIDEO): HD Mode: 1920x1080 FrameRate 2
CSAPI (VIDEO): SD Mode: 720x576 FrameRate 2
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 0
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to pan&scan
>>>>>[src/gui/osd_helpers.cpp - setVideoSystem:229] after SetVideoSystem:
                var.xres        : 1920, var.yres    : 1080, var.yres_virtual: 2160
                fix.line_length : 7680, fix.smem_len: 16588800 Byte
>>>>>[changeOsdResolution:75] osd mode: OSDMODE_1080 => OSDMODE_1080, automode: false, forceOsdReset: false
[fb_accel_cs_hd2] SetMode: 32bits, red 8:16 green 8:8 blue 8:0 transp 8:24
[fb_accel_cs_hd2] 1920x1080x32 line length 7680. using PNX849X Series graphics accelerator.
CSAPI (AUDIO): PCM: Starting HDMI port
CSAPI (VIDEO): Creating REGION on PLANE CNXT_VPP_PLANE_VIDEO_PIP (1) on UNIT 1
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 0
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to pan&scan
CSAPI (VIDEO): Attaching VIDEO buffer to decoder
CSAPI (AUDIO): setVolume: in 50 atten -14000
[zapit] Loading services, channel size 280 ..
[getservices.cpp:LoadServices:917] Loading satellites...
[getservices.cpp:FindTransponder:623] going to parse dvb-s provider Astra (19.2E)
[zapit] 1610 services loaded (1610)...
[zapit] service loading took: 157 msec
[zapit.cpp:PrepareChannels:1192] LoadServices: success
[bouquets.cpp:readEPGMapping:1440] read /var/tuxbox/config/zapit/epgmap.xml
[bouquets.cpp:parseBouquetsXml:418] reading bouquets from /var/tuxbox/config/zapit/bouquets.xml
[bouquets.cpp:parseBouquetsXml:520] total: 61 bouquets
[bouquets.cpp:loadWebchannels:888] Loading webtv from /var/tuxbox/webtv/webtv_usr.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webradio from /var/tuxbox/webradio/webradio_usr.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webradio from /usr/share/tuxbox/neutrino/webradio/80s80s.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webradio from /usr/share/tuxbox/neutrino/webradio/90s90s.xml ...
[bouquets.cpp:loadWebchannels:888] Loading webradio from /usr/share/tuxbox/neutrino/webradio/stompfm.xml ...
[bouquets.cpp:parseBouquetsXml:418] reading bouquets from /var/tuxbox/config/zapit/ubouquets.xml
[bouquets.cpp:parseBouquetsXml:520] total: 131 bouquets
############## CBouquetManager::makeRemainingChannelsBouquet: numbers start at: tv 1 radio 1 ############
[zapit] bouquet loading took: 1050 msec
[zapit.cpp:Start:2705] channels have been loaded succesfully
[zapit.cpp] diseqc type = 0
[femanager.cpp:loadSettings:225] load config for fe0
[femanager.cpp:linkFrontends:374] linking..
[femanager.cpp:linkFrontends:425] Frontend #0: is independent
[frontend.cpp:setDiseqcType:1682] fe0: NO_DISEQC
[femanager.cpp:linkFrontends:442] pip demux: 2
CSAPI (API): MessageQueue: queue opened with name CA-QUEUE (00000022)
CS_API: chip is SHINER
CSAPI (CA): Initializing CI failed!
CS_API: chip is SHINER
[zapit] GetConfig...
CSAPI (AUDIO): SetSRS: IQ yes NMGR no algo 1 level 82
[zapit] starting... tid 1002
Start
CSAPI (AUDIO): SetHdmiDD OFF
CSAPI (AUDIO): SetSpdifDD ON
CSAPI (AUDIO): EnableAnalogOut ON
[zapit] sdt monitor started
[ca_generic_sc_drv_trident.cpp:Init:367] Init: number of smartcards : 1 (list: 1)
CSAPI (API): MessageQueue: queue opened with name ConaxCAS (00000024)
[neutrino] [CVideoSettings] [setupVideoSystem - 657], setup video system...
>>>>>[changeOsdResolution:75] osd mode: OSDMODE_1080 => OSDMODE_1080, automode: true, forceOsdReset: false
[fb_accel_cs_hd2] SetMode: 32bits, red 8:16 green 8:8 blue 8:0 transp 8:24
[fb_accel_cs_hd2] 1920x1080x32 line length 7680. using PNX849X Series graphics accelerator.
ConaxCAS: Thread starting
[neutrino] [CVideoSettings] [initVideoSettings - 608], init video settings...
CS_API: chip is SHINER
CSAPI (VIDEO): Changing to analog mode 302 for revision 11
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 1
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to letterbox
CSAPI (VIDEO): setAspectRatio: aspect 3 mode 1
CSAPI (VIDEO): VIDEO: Set format to 16:9
CSAPI (VIDEO): VIDEO: Set aspect mode to letterbox
CSAPI (VIDEO): SetDBDR: off
CSAPI (VIDEO): SetAutoModes: NTSC          enabled
CSAPI (VIDEO): SetAutoModes: SECAM         enabled
CSAPI (VIDEO): SetAutoModes: PAL           enabled
CSAPI (VIDEO): SetAutoModes: 480p          enabled
CSAPI (VIDEO): SetAutoModes: 576p          enabled
CSAPI (VIDEO): SetAutoModes: 720p 60Hz     enabled
CSAPI (VIDEO): SetAutoModes: 1080i 60Hz    enabled
CSAPI (VIDEO): SetAutoModes: 720p 50Hz     enabled
CSAPI (VIDEO): SetAutoModes: 1080i 50Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 24Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 25Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 50Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 60Hz    enabled
CSAPI (VIDEO): SetAutoModes: 1080p 23.97Hz enabled
CSAPI (VIDEO): SetAutoModes: 1080p 29.97Hz enabled
CSAPI (VIDEO): SetControl: BRIGHTNESS to 0
CSAPI (VIDEO): SetControl: CONTRAST to 0
CSAPI (VIDEO): SetControl: SATURATION to 0
[neutrino] [CVideoSettings] [changeNotify - 734], SD OSD enable: 1
CSAPI (VIDEO): ShowPicture: /var/tuxbox/icons/start.jpg
CSAPI (VIDEO): Stop: blank 1
CSAPI (VIDEO): Video Picture Information
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Decode Dimensions:   (1280 x 720)
CSAPI (VIDEO): Display Extension Info Present:   No
CSAPI (VIDEO): Aspect Ratio: OTHER (0) Frame Rate:   0 (0)
CSAPI (VIDEO): Color Space:  0 Interlaced:   No
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): setBlank: 0
[rcinput:checkdev] /dev/input mtime changed
[rcinput:open] opened /dev/input/nevis_ir (fd 43) ev 0x2
CRCInput::set_rc_hw: Set IOCTRL : IOC_IR_SET_PRI_PROTOCOL, 00400
CRCInput::set_rc_hw: Set IOCTRL : IOC_IR_SET_PRI_ADDRESS,  0FF80
[zapit.cpp:leaveStandby:2522] standby 1 recording 0
[zapit.cpp:ZapIt:533] [zapit] zap to Das Erste HD (b45403fb0001283d tp 2ce500c003fb0001)
[zapit] GetConfig...
[femanager.cpp:getFrontend:620] Check fe0: mode 1 locked 0 freq 0 TP 0 - channel freq 11493 TP 2ce500c003fb0001
[femanager.cpp:getFrontend:635] Selected fe: 0
[femanager.cpp:allocateFE:716] pip demux: 2
[zapit.cpp:StopPlayBack:2450] standby 0 playing 0 forced 0 send_pmt 1
[fe0/0] tune to 11493000 DVB-S2 8PSK 2/3 H/L srate 22000000 pli -1 plc 0 plm 1 (tuner 1743000 offset 9750000 timeout 4000)
[frontend.cpp:setFrontend:1545] [fe0/0] tuner pilot 2 (feparams 2)

[frontend.cpp:getEvent:804] [fe0/0] ******** FE_HAS_LOCK: freq 1743000
[fe0/0] tuning took: 178 msec (min 178 max 178)
CS_API: chip is SHINER
[zapit] parsing pmt pid 0x13EC (Das Erste HD)
[subtitles] DVBSub: PID=0x13f1, lang=deu, cpageid=0001, apageid=0001
[zapit] channel found, audio pid 13ee, subtitle pid 0 mode 0 volume 50
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 START src 0 mask 0 -> 1 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:337]  socket only
[pmt] set update filter, sid 0x283d pid 0x13ec version 3
CSAPI (CA): GUI not ready to receive messages!
[timerd] wakeup from standby: no
[neutrino CEC Settings] setCECSettings init CEC settings...
CSAPI (HDMI-CEC): Physical Address: 1.0.0.0
CSAPI (CA): GUI not ready to receive messages!
CSAPI (HDMI-CEC): Device free (Logical Address: 03)
[pwrmngr.cpp:Init:82] cnxt_scd_init: **** ERROR **** CNXT_STATUS_ALREADY_INIT
CSAPI (POWER-CLK): cnxt_scd_open succeeded - Handle = 0x90810614.
CStreamManager::Listen: on 31339, fd 42
timerd startup, tid 1027
Starting STREAM thread keeper, tid 1031
2022-09-08 07:37:09.183 [sectionsd] start
[yhttpd] Webserver nhttpd/3.4.1 (yhttpd_core/1.3.2) tid 1030
2022-09-08 07:37:09.202 [sectionsd] Caching: 14 days, 360 hours Extended Text, max 60000 events, Events are old 1 hours after end time
2022-09-08 07:37:09.204 [sectionsd] NTP: enabled, command /usr/sbin/ntpdate 0.de.pool.ntp.org
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 0046
CSAPI (HDMI-CEC): Opcode: 46, Function: [Give OSD Name]
2022-09-08 07:37:09.259 [sectionsd] starting
2022-09-08 07:37:09.261 [sectionsd] SIevent size: 88
2022-09-08 07:37:09.263 [sectionsd] ====> USING SLOW ADDEVENT. export 'NO_SLOW_ADDEVENT=1' to avoid <===
2022-09-08 07:37:09.310 [sectionsd] timeThread::run:: starting, pid 907 (1696896176)
2022-09-08 07:37:09.318 [sectionsd] eitThread::run:: starting, pid 907 (1690297520)
2022-09-08 07:37:09.332 2022-09-08 07:37:09.339 [sectionsd] freeSatThread::run:: starting, pid 907 (1686103216)
[sectionsd] cnThread::run:: starting, pid 907 (1688200368)
CInfoIcons::Init() reports 5 entries
[yhttpd] Webserver starting...
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 0046
CSAPI (HDMI-CEC): Opcode: 46, Function: [Give OSD Name]
[neutrino] menue setup
[neutrino] init menus...
[neutrino] mediaplayer menu instance created
[network config] Instance created
[neutrino] [CNetworkSetup]      [getInstance - 90],  Instance created
CS_API: chip is SHINER
CS_API: chip is SHINER
[neutrino] ScanSetup Instance created
[mb]->refreshBrowserList
[mb]->refreshFilterList 24
[neutrino CMoviePlayerGui] Instance created...
[neutrino] integratePlugins: add Favoriten sichern
[neutrino] integratePlugins: add Benutzer-Bouquets
[neutrino] registering as event client
[neutrino] had to wait 0 ms for timerd start...
CSAPI (AUDIO): SetMute off
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 0000 data bytes: 64 00)
CSAPI (HDMI-CEC): Opcode: 00, Function: [Feature Abort]
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 0000 data bytes: 64 00)
CSAPI (HDMI-CEC): Opcode: 00, Function: [Feature Abort]
[sdt monitor] wakeup...
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 0083
CSAPI (HDMI-CEC): Opcode: 83, Function: [Give Physical Address]
CSAPI (VIDEO): StopPicture
CSAPI (VIDEO): setBlank: 1
CSAPI (VIDEO): setAspectRatio: aspect -1 mode 1
CSAPI (VIDEO): VIDEO: Set aspect mode to letterbox
CSAPI (HDMI-CEC): Device free (Logical Address: 03)
[neutrino] Creating channels lists...
[neutrino] got 1080 TV and 243 RADIO channels
[neutrino] all channels took: 3 msec
[neutrino] created Astra (19.2E) (192) bouquet with 1080 TV and 213 RADIO channels
[neutrino] sat took: 12 msec
2022-09-08 07:37:12.982 [sectionsd] Reading data from file: /mnt/autofs/NAS_Stick/EPG/index.xml
[neutrino] got 30 WebRadio channels
[neutrino] sats took: 36 msec
[neutrino] got 100 TV and 36 RADIO bouquets
[neutrino] took: 55 msec
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2505] newmode 0 sort old -1 new 0
[neutrino.cpp:tvMode:4904] rezap 1 current mode MODE_TV
CVFD::showServicename:
CRemoteControl::tvMode
CNeutrinoApp::SetChannelMode 0 [tv]
[neutrino.cpp:SetChannelMode:2505] newmode 0 sort old -1 new 0
**************************** CChannelList::zapTo_ChannelID b45403fb0001283d
**************************** CChannelList::zapToChannel me 0x1650ac0 Alle Kanäle tuned 268435455 new Das Erste HD -> b45403fb0001283d
2022CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 0083
CSAPI (HDMI-CEC): Opcode: 83, Function: [Give Physical Address]
-09-08 07:37:13.068 [sectionsd] commandserviceStopped
stopPlayBack: stopping...
stopPlayBack: stopped
CChannelList::adjustToChannelID me 0x1650ac0 [Alle Kanäle] list size 1080 channel_id b45403fb0001283d
2022-09-08 07:37:13.098 [sectionsd] cnThread: stop eit update filter (not active)
2022[zapit.cpp:ZapIt:533] [zapit] zap to Das Erste HD (b45403fb0001283d tp 2ce500c003fb0001)
[zapit] saving channel, apid 13ee sub pid 0 mode 0 volume 50
[zapit] GetConfig...
[femanager.cpp:getFrontend:529] live fe 0 on the same TP
[femanager.cpp:allocateFE:716] pip demux: 2
-09[zapit.cpp:StopPlayBack:2450] standby 0 playing 0 forced 0 send_pmt 1
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 STOP src 0 mask 1 -> 0 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:385]  (newmask == 0)
[capmt.cpp:SetMode:442] CI: not used, disabling TS
CS_API: chip is SHINER
-0CSAPI (CA): GUI not ready to receive messages!
CS_API: chip is SHINER
8 07:37:13.116 [sectionsd] commandserviceStopped done
2022-09-08 07:37:13.219 [sectionsd] commandserviceChanged: Service change to b45403fb0001283d demux #0
2022-09-08 07:37:13.223 [sectionsd] changeDMX: for 0x4e not ignored! even though real_pauseCounter> 0 (1)
2022-09-08 07:37:13.231 [sectionsd] changeDMX: for 0x50 not ignored! even though real_pauseCounter> 0 (1)
2022-09-08 07:37:13.236 [sectionsd] changeDMX: for 0x60 not ignored! even though real_pauseCounter> 0 (1)
CHDDDestExec::exec: hd-idle = /usr/sbin/hd-idle
CSAPI (HDMI-CEC): Device free (Logical Address: 03)
[zapit] parsing pmt pid 0x13EC (Das Erste HD)
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 008F
CSAPI (HDMI-CEC): Opcode: 8F, Function: [Give Device Power Status]
sh: you need to specify whom to kill
CSAPI (CA): GUI ready to receive messages
[CWeather]: GetWeatherDetails
[subtitles] DVBSub: PID=0x13f1, lang=deu, cpageid=0001, apageid=0001
[zapit] channel found, audio pid 13ee, subtitle pid 0 mode 0 volume 50
################################## after all ##################################: 10327 msec
[zapit.cpp:StartPlayBack:2366] standby 0 playing 0 forced 0
[zapit] vpid 13ED apid 13EE pcr 13ED
[neutrino] initialized everything
[CPlugins] could not find startup
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 008F
CSAPI (HDMI-CEC): Opcode: 8F, Function: [Give Device Power Status]
CSAPI (AUDIO): Start: audio type 1
CSAPI (AUDIO): Start: unknown SPDIF encoded mode for stream type 1
CSAPI (AUDIO): HDMI: sink forcing decoded
CSAPI (AUDIO): Connecting decoded audio to SPDIF
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to SPDIF
CSAPI (AUDIO): Connecting decoded audio to HDMI
CSAPI (AUDIO): PCM: connecting Decoded PCM(DSP) stream to HDMI
CSAPI (AUDIO): Starting decoded stream
CSAPI (AUDIO): PCM: Starting Decoded PCM(DSP) stream
[SDT] section 0 last 0 tsid 0x3fb onid 0x1 -> use
CSAPI (AUDIO): Input stream is MPEG
CSAPI (VIDEO): Start: pcr 0x13ed vpid 0x13ed vtype 1 (stopped)
[capmt.cpp:SetMode:256] PLAY: fe_num 0 dmx_src 0
[capmt.cpp:SetMode:309] channel b45403fb0001283d [Das Erste HD] mode 0 START src 0 mask 0 -> 1 update 0 rmode 0 mp 0
[capmt.cpp:SetMode:337]  socket only
CSAPI (AUDIO): New Audio PTS delay is 24288uS
HandlePMT: Card not ready!
ConaxCAS: failed to send PMT
[pmt] set update filter, sid 0x283d pid 0x13ec version 3
CSAPI (VIDEO): New Video PTS delay is 20000uS
CSAPI (VIDEO): Video Picture Information
CSAPI (VIDEO): -------------------------
CSAPI (VIDEO): Decode Dimensions:   (1280 x 736)
CSAPI (VIDEO): Display Extension Info Present:   Yes
CSAPI (VIDEO): Aspect Ratio: 16:9 (3) Frame Rate:   5 (1)
CSAPI (VIDEO): Color Space:  6 Interlaced:   No
CSAPI (VIDEO): Display Dimensions:   (1280 x 720)
CSAPI (VIDEO): Transfer Characteristics:   (2)
CSAPI (VIDEO): Matrix Coefficients:   (4)
CSAPI (VIDEO): -------------------------
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 008F
CSAPI (HDMI-CEC): Opcode: 8F, Function: [Give Device Power Status]
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 008F
CSAPI (HDMI-CEC): Opcode: 8F, Function: [Give Device Power Status]
[SDT] tid 3fb onid 01
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 00C3
CSAPI (HDMI-CEC): Opcode not handled (C3)
CSAPI (HDMI-CEC): Initiator: 00, Destination 03, Opcode 00C3
CSAPI (HDMI-CEC): Opcode not handled (C3)
[sdt monitor] no changes.
CSAPI (VIDEO): Video event CNXT_VIDEO_EVENT_PLAYING, sync took: 1272 msec
CSAPI (VIDEO): Video delay: 20000uS VPP HD delay: 26903uS VPP SD delay: 11703uS avg. VPP delay: 19303uS Audio delay: 24288uS New delta: 15815uS
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (b45403fb0001283d)
2022-09-08 07:37:15.049 [sectionsd] commandserviceChanged: Service change to b45403fb0001283d demux #0
CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (b45403fb0001283d)
2022-09-08 07:37:15.229 [sectionsd] commandserviceChanged: Service change to b45403fb0001283d demux #0
CSAPI (VIDEO): setAspectRatio: aspect 3 mode -1
CSAPI (VIDEO): VIDEO: Set format to 16:9
CVFD::showServicename: Das Erste HD
CSAPI (VIDEO): setAspectRatio: aspect -1 mode 1
CSAPI (VIDEO): VIDEO: Set aspect mode to letterbox
 8 Sep 07:38:27 ntpdate[1040]: step time server 54.36.110.36 offset +70.897344 sec
2022-09-08 07:38:27.280 [sectionsd] timeThread: Time set via NTP, going to sleep for 1800 seconds.
2022-09-08 07:38:27.286 2022-09-08 07:38:27.286 2022-09-08 07:38:27.286 [sectionsd] cnThread::run:: time set: Thu Sep  8 07:38:27 2022

[sectionsd] freeSatThread::run:: time set: Thu Sep  8 07:38:27 2022

[sectionsd] eitThread::run:: time set: Thu Sep  8 07:38:27 2022

2022-09-08 07:38:27.608 [sectionsd] addEvent: ch 03fb0001283d running 4 (curr) got_CN 0
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
2022-09-08 07:38:28.240 [sectionsd] addEvent: ch 03fb0001283d running 1 (next) got_CN 1
[neutrino] CSectionsdClient::EVT_GOT_CN_EPG
[ConfigFile] saving /var/tuxbox/config/timerd.conf
2022-09-08 07:38:30.169 [sectionsd] cnThread: eit update filter, ch 0x03fb0001283d, current ver 0x09  got events 3 (not active)
Die Logs sind wieder ab Taste für Neustart bis entweder Stillstand Bild am Schirm.

Keine Ahnung was genau das Problem ist. Dieser Beitrag soll nur noch das Thema ergänzen und evtl. zur Hilfe bei ähnlichen Problemen anderer Benutzer dienen.
'
Vielen Dank für Eure Antworten

Bualicher

Benutzeravatar
Bualicher
NI - VIP
Beiträge: 230
Registriert: Di 12. Apr 2016, 12:22

Re: Tank macht keinen Neustart

Beitrag #14 von Bualicher » Do 8. Sep 2022, 09:40

Bualicher hat geschrieben:
Do 8. Sep 2022, 08:04
...
Die Logs sind wieder ab Taste für Neustart bis entweder Stillstand Bild am Schirm.
...
Muss mich selber korrigeren:
Soll natürlich "Die Logs sind wieder ab Taste für Neustart bis entweder Stillstand oder Bild am Schirm." heißen
'
Vielen Dank für Eure Antworten

Bualicher

Antworten

Zurück zu „Apollo (TANK)“