====== ASTUSB driver ====== This driver supports the DIY "AST USB-LCD" interface: an ATtiny2313 that connects a HD44780 based text display to USB. Schematics and firmware can be found at [[http://ast.m-faq.de/USB-LCD/USB-LCD.htm]]. The interface is detected by its USB vendor and product ID (0x03eb / 0x7a53). Displays with two controllers (more than two rows and more than 20 columns) are supported. ---- ===== Display Section ===== Display { Driver 'ASTUSB' Size Bus Device Backlight <0|1> Icons asc255bug <0|1> } ---- ===== Parameters ===== |**Driver**|'ASTUSB'| |**Size**|x e.g. '20x4'. Required.| |**Bus**|Bus name as displayed during USB scan (e.g. '003'). Only required when using more than one interface.| |**Device**|Device name as displayed during USB scan (e.g. '004'). Only required when using more than one interface.| |**Backlight**|initial backlight state (0 = off, 1 = on)| |**Icons**|Number of user-defined chars reserved for Icons (default: 0)| |**asc255bug**|set to 1 if you don't get solid blocks in bars, but an inverted P| ---- ===== Plugins ===== The driver provides the following function: |LCD::backlight(n)|switch the backlight on (n = 1) or off (n = 0)| ---- ===== Example ===== This is the entry from //lcd4linux.conf.sample//: Display ASTUSB { Driver 'ASTUSB' Size '20x4' Backlight 1 } ---- ===== Requirements ===== libusb (0.1) is needed. The driver is selected at build time with //--with-drivers=ASTUSB//. ----