====== TeakLCM driver ======
This driver supports the TeakLCM, a character display module that is connected to a serial port and uses a framed protocol with checksums. The driver was written by Hans Ulrich Niedermann and Andreas Thienemann.
----
===== Display Section =====
Display {
Driver 'TeakLCM'
Port
Speed
Size
}
----
===== Parameters =====
|**Driver**|'TeakLCM'|
|**Port**|serial device the display is attached to (e.g. '/dev/ttyS1')|
|**Speed**|baud rate of the serial port (the sample configuration uses 38400)|
|**Size**|x e.g. '20x2'. Required.|
----
===== Widgets =====
Only the [[:lcd4linux:widget_text|Text widget]] is available. The driver does not support user-defined characters, so there are no icons and no bars.
----
===== Notes =====
* The connection to the display is established shortly after the start of LCD4Linux; the driver then switches the display and its backlight on. When LCD4Linux stops, the display is cleared and switched off.
* //lcd4linux.conf.sample// contains the entries //Backlight// and //Icons// for this display. //Backlight// is not evaluated by the driver, and as there are no user-defined characters, //Icons// has to stay 0.
----
===== Example =====
Display TeakLCM {
Driver 'TeakLCM'
Size '20x2'
Port '/dev/ttyS1'
Speed 38400
}
----
===== Requirements =====
No external libraries. The driver is selected at build time with //--with-drivers=TeakLCM//.
----