Inhaltsverzeichnis
Displays
This a photo of my collection of liquid crystal displays about two years ago. It did grow a lot in the meantime, but I couldn't find the time to take a new photo Most of the displays have been contributed by various folks out there. Thank you guys!
To check which driver is builtin to the binary type
lcd4linux -l
Driver for the following devices are available:
- ASTUSB DIY ATtiny2313 USB-to-HD44780 interface
- Beckmann+Egle MiniTerminals and CompactTerminals
- BWCT USB-to-HD44780 interface
- Crystalfontz serial and USB displays
- Curses (Text) for testing and debugging
- CwLinux character and graphical displays
- 4D Systems Display Graphics Modules
- DPF Digital Photo Frame
- Electronic Assembly RS232 Graphic serial graphic units
- EFN and EUG 100 EFN LED modules connected to an ethernet to serial converter
- Allnet FW8888 Firewall Appliance
- Futaba VFD vacuum fluorescent displays on the parallel port
- G-15 : Z-10 : Dell M1730 Logitech combined keyboard/LCD screen, speaker/LCD and Dell M1730 with Logitech gaming LCD
- GLCD2USB DIY USB interface for graphic displays GLCD2USB homepage
- Hitachi HD44780 probably the most common LCD controller out there!
- ili9486_fb SPI TFT displays with ILI9486 controller on Orange Pi / Raspberry Pi (via fbtft framebuffer)
- Image driver to get pictures out of LCD4Linux
- IRLCD : DIY USB to IR receiver + HD44780 based LCD display DIY HD44780 / IR receiver to USB 1.1 interface, with ATtiny2313 (based on AVRUSB AVRUSB homepage)
- LCD2USB driver DIY HD44780 to USB interface LCD2USB homepage
- LCD-Linux HD44780 kernel device driver
- LCDTerm serial-to-HD44780 interface
- LEDMatrix DIY ethernet LED matrix display LEDMATRIX homepage
- LUIse driver LCD-USB-Interface by Wallbraun Electronics
- Logic Way ABP (ABP08, ABP09) driver Logic Way appliance control panel ABP08, ABP09 Logic Way GmbH
- Mitsubishi M50530 similar to HD44780, but for larger displays
- MatrixOrbital serial and USB displays
- MatrixOrbitalGX GX Series USB LCD displays
- MDM166A Futaba MDM166A graphic VFD (96×16) with symbols
- Milford Instruments serial displays
- Newhaven driver for various I2C and serial displays by Newhaven
- Noritake driver for various displays by Noritake
- Null driver for testing purposes
- Palm Pilot emulating a MatrixOrbital display
- Pertelian driver serial over usb LCD device Pertelian
- PHanderson driver serial-to-HD44780 controller PHAnderson homepage
- PICGraphic serial-to-graphic interface by Peter Bailey
- picoLCD driver true USB hid LCD device with keypad, gpo and infrared receiver picoLCD homepage
- picoLCD Graphic 256×64 USB graphic display with keypad and LEDs picoLCD homepage
- RouterBoard driver to connect a HD44780 on their LCD header
- Samsung SPF Samsung digital picture frames (SPF-72H … SPF-1000P, see the driver page for the list of models)
- ShuttleVFD VFD of Shuttle barebones (SG33G5M, PF27 upgrade kit)
- SimpleLCD Simple serial terminal display, supports an optional and limited vt-100 mode
- Skyper display module of an NEC 21a pager
- st2205 st2205 based displays, check the picframe project
- !SureElectronics LCD Display Board with USB (as part of MatrixOrbital driver)
- Toshiba T6963 Controller for large graphical LCD's
- TeakLCM serial character display module
- TEW673GRU built-in LCD of the TRENDnet TEW-673GRU router (SPI)
- TREFON USB LCD text and graphic displays
- USB2VFD 40×2 USB VFDs sold as AIDA64 status displays
- USBHUB Driver for the port status indicator LEDs on an USB HUB
- USBLCD USB-to-HD44780 interface
- VNC driver VNC Server
- vuduo2 front display of the VU+ Duo2 set-top box
- vuplus4k front display of VU+ 4K set-top boxes (Solo 4K, Duo 4K)
- WincorNixdorf BA63 & BA66 serial cashier displays
- X11 driver simulating displays of any size
- serdisplib driver for all displays supported by the serdisplib project:
- Optrex 323 displays
- ALPS display with display module kit by pollin
- EPSON E0855-2 display with display module kit by pollin
- generic driver for PCD8544-based displays
- generic driver for PCF8511-based displays
- LPH7366 display with backlight
- LPH7690 display
- Nokia 7110 display (SED1565-based)
- NEC 21a (Skyper) display module
- LPH7508 display module with display module kit by pollin
- Hyundai HP12542R display module with display module kit by pollin
- Ericsson T20/T28/T29 i2c-displays
- Ericsson R520/T65 i2c-displays
- generic driver for T6963-based displays
- Toshiba TLX1391 display (T6963-based)
- T6963-based display module with built-in parallel to serial converter
- generic driver for SED1330/SED1335-based displays
- generic driver for S1D13700-based displays
- displays driven by USB13700 USB module
- driver for Nokia 3510i/3530 displays (S1D15G14-based)
- driver for Nokia 6100 and compliant displays (S1D15G10-based)
- generic driver for KS0108-based displays
- c't includ USB-display
- generic driver for LH155-based displays
- Sharp M078CKA 240×64 (LH155-based)
- Pictiva 96×36 OLED 1bit
- Pictiva 96×64 colour OLED 16bit
- Pictiva 128×64 yellow OLED 4bit
- linux4media USB-interface E-5i-USB
- linux4media USB-interface w/ 132×65 colour display
- displays driven by GOLDELOX-MD1 module
- Pictiva 256×64 yellow OLED 4bit
- Alphacool USB-displays 200×64 or 240×128
On the driver overview page the drivers and their hardware connections are listed.
Functions available with every driver
Besides the functions of the individual drivers (see the driver pages), every display driver provides these functions for the Evaluator:
| LCD::width() | width of the display: columns on text displays, pixels on graphic displays |
| LCD::height() | height of the display: rows on text displays, pixels on graphic displays |
| LCD::xres() | width of one character in pixels (the width of the configured Font on graphic displays) |
| LCD::yres() | height of one character in pixels (the height of the configured Font on graphic displays) |
| Layout::width() | width of the layout framebuffer (which may be larger than the display, see Layout) |
| Layout::height() | height of the layout framebuffer |
They are useful to write configurations that adapt to the display, e.g. width LCD::width() for an image that should fill the display, or LCD::width() / LCD::xres() for the number of characters per line on a graphic display.
Drivers with GPIOs additionally provide LCD::GPO(n, value) and LCD::GPI(n), see the GPO widget.
Note: function names are case sensitive. The functions have to be written exactly as shown on the driver pages (LCD::backlight(), not LCD::Backlight()).
Graphic displays
All graphic drivers accept the entries Foreground, Background and Basecolor (see Colors) and Inverted (0 or 1, to swap active and inactive pixels) in their display section, even if the driver page does not mention them.
Due to the modular driver concept of LCD4Linux, it should be very easy to support other displays. If you have an unsupported display, know a bit of programming in C, have some spare time and want to read your name here, read the following Howto and start coding! If you need help, just drop us an email.

